COX Contour box - Quick Start Instructions; Plug in your Contour box; Activate your Contour box; Set up your Voice remote

A
B
C
Set up your Voice remoteActivate your Contour box
Quick start instructions
Plug in your Contour box
Start by turning on your TV.
Using the source or input button on your original TV remote, select the
HDMI connection that matches the HDMI port you plugged the cable into earlier.
You'll be prompted to follow on–screen instructions.
Then hang tight for a few minutes for the activation of your Contour box to finish.
Simply follow the on-screen instructions to set up your new Voice remote.
When you see "All Set", press OK.
For help programming and troubleshooting your remote, visit Cox.com/remote-help.
For quick how-to videos, go to Cox.com/support. Check out the enclosed
troubleshooting tips and FAQs card for more information.
We recommend you use the new cables included in your kit.
Now make sure that your large Contour box is installed. It needs to be up and running
before continuing this installation.
First, screw one end of the coax cable into an active cable outlet (try the same
outlet where your previous cable box was connected) and the other end into the
"Cable from Wall" port on the back of your new Contour box.
Then, plug the blue end of the HDMI cable into the HDMI port on the back of your
Contour box and plug the other black end into the desired HDMI port on your TV.
Lastly, connect the power cord into the power port on the back of your Contour
box and plug the other end into an electrical outlet. This will power it on.
2
3
1
2
3
1
WEB: Cox.com/support
and Cox.com/learn
CALL:
1-888-556-1193
CHAT: text an agent
at 54512 or live chat
on Cox.com/chat
APP: Cox Connect
for 24/7 support
and helpful videos
FPO BARCODE
52 0-15 33 -19 - 08