119
After you set Power On, you will also need to set the Power On channel, days and time. To do this, begin at the Power
On Timer Menu:
1. Use the UP or DOWN arrow to highlight Power On Channel. Press SELECT.
2. Use the UP or DOWN arrow to select a channel. You may also choose the last channel viewed.
3. Press SELECT to confirm your choice.
4. Press the LEFT arrow to return to the Power On Timer Menu.
5. Use the DOWN arrow to highlight Days. Press SELECT.
6. Use the UP or DOWN arrow to highlight the days you want Power On to start your receiver. Press SELECT. Days
are noted by date and extend 12 days into the future.
7. Continue highlighting and selecting days until you have completed your list.
8. Press the LEFT arrow to return to the Power On Timer Menu.
9. Use the DOWN arrow to highlight Time. Press SELECT.
10. Use the UP or DOWN arrow to highlight the time of day you want Power On to start your receiver. Press SELECT.
Times are available in half-hour increments.
11. Press the LEFT arrow twice to return to the Timers Menu or press EXIT to return to live television.
Set Power Off
Power Off automatically turns the receiver off at a specific time each day. This setting is specific to each receiver.
To set a Power Off time, begin at the Timers Menu:
1. Use the UP or DOWN arrow to highlight Power Off Timer. Press the RIGHT arrow or SELECT button to open the
Power Off Timer Menu, which will appear in the card on the left.
2. With the highlight bar on Power Off Timer Status, press the RIGHT arrow or SELECT to move the highlight bar to
the options in the center card.
3. Use the UP and DOWN arrow to select On or Off. The highlight bar will be on Off when you arrive at the
options list.
4. Press SELECT to confirm your choice.
To Next Page
Loading...
