50
There are too many conflicts to schedule this
recording. You must cancel other recordings. To view
a list of scheduled conflicts, please select Scheduled
Recordings by going to the DVR List.
You may see this alert if there are more than two
schedule conflicts, most likely associated with a series
recording or recording from search results.
Before you can record the series or search results, you
must first cancel the scheduled recordings that are
causing the conflicts. You can do this from Scheduled
Recordings section under DVR List.
Some episodes of this series are conflicting with your
previously scheduled recordings. We’ll do our best to
record as many episodes of this series as we can. But,
to record the maximum number of episodes, please
change the priority of this series in the Series Manager.
This alert appears during the scheduling process to
let you know that your new series recording conflicts
with multiple episodes of a previously scheduled series
recording.
Press A to acknowledge the alert. Return to the Series
Manager to change series priorities or do nothing if
you are comfortable with the conflicts. Non-conflicting
episodes of the series will be scheduled to record.
All tuners are scheduled to record programs at this
time. To record this program, you must cancel a
scheduled recording or record the new program on a
different DVR.
• Program 1 (by name)
• Program 2 (by name)
• ...
• Program 6 (by name)
If you attempt to schedule a program at a time when all
tuners are already scheduled to record programs, you
will see this alert.
You may choose to cancel the recording of one of
the previously scheduled programs by moving the
highlight bar to the choice and pressing SELECT. Press
A to accept the change.
You may also elect to not record the new program – the
one that caused the conflict – by pressing C to close
the alert box.
All tuners are currently in use. To change to a different
channel, you must first cancel one of the following
recordings.
• Program 1 (by name)
• Program 2 (by name)
• ...
• Program 6 (by name)
This alert occurs when you try to tune in a program
at the same time all tuners are busy recording other
programs. You will not be allowed to change channels
until you resolve this conflict.
You may choose to stop one recording and change
channels by moving the highlight bar to your choice
and pressing SELECT.
You may also continue recording without changing
channels by pressing C to close the alert box.
After one of your recordings finishes, you may change
channels freely.
To Next Page
Loading...
