54
Scan a Recorded Program
Watching programs recorded to a DVR offers the same ability to scan forward and backward in your program that you
find in programs taped by a VCR. Programs recorded to a DVR also allow scanning at multiple speeds.
The different functions are described below.
• PLAY: This button starts your program at normal speed.
• PAUSE: You can pause a recorded program for up to 15 minutes. Pausing longer than that stops your
program and brings you back to the Recorded Programs list. You can resume watching your program from
the Actions Card of that program. PAUSE also toggles between the Pause and Play functions.
• STOP: This button stops the playback
of your recording and displays a dialog
box that asks whether you want to save
this recording for future viewing or
immediately delete this recording.
• FAST FORWARD: This button lets
you scan ahead in your program at up
to four different speeds. Press FAST
FORWARD once to begin fast forwarding.
Each successive press (up to 4 presses)
increases the speed. Pressing FAST
FORWARD a fifth time returns the
program to normal speed. You can also
press PLAY to return the program to
normal speed. If you fast forward to the
program’s end, you will see the Program
Finished dialogue box asking you if you
want to delete this program from your
DVR or keep it for future viewing.
• REWIND: This button lets you scan
backwards in your program at up to four
different speeds. Press REWIND once to
begin rewinding. Each successive press
(up to 4 presses) increases the rewind
speed. Pressing REWIND a fifth time
returns the program to normal forward
speed, just as if you had pressed PLAY.
If left to rewind to the beginning, the
program will start playing automatically.
• PAUSE & FAST FORWARD: Pressing
PAUSE and then FAST FORWARD
begins a slow motion playback of
the recorded program at the slowest
speed. Pressing FAST FORWARD a second time fast-forwards the program at a slightly higher but slower than
normal fast forward speed. Pressing FAST FORWARD a third time fast-forwards the program at the normal
fast-forward speed. You can resume watching at normal speed at any time by pressing PLAY.
• PAUSE & REWIND: Pressing PAUSE and then REWIND begins a slow motion rewind of the recorded
program. Slow motion rewind is available only in one speed. Pressing REWIND the second time rewinds
the program at the slowest speed. Pressing REWIND a third time resumes the playback at normal speed.
Additionally, you can resume watching at normal speed at any time by pressing PLAY.
• PAUSE & RIGHT: Pressing PAUSE and then RIGHT begins a frame by frame playback of the recorded
program. You can walk through different frames of the recorded program by repeatedly pressing the RIGHT
arrow button on your remote control.
Whenever you scan a recorded program, this banner
willappear showing the total running time and your
placewithin the program.
Pressing the STOP button displays a dialog box that displays
three different actions you may want to take.
To Next Page
Loading...
