57
Manage Scheduled Recordings
The Contour Program Guide lets you review and
manage all your currently scheduled recordings,
including changing the recording options and
canceling a scheduled recording.
To review your Scheduled Recordings, begin at the
DVR List Menu on the left in focus.
1. Use the DOWN arrow to move the
highlight bar to Scheduled Recordings.
All of your scheduled recordings, listed in
chronological order beginning with Today,
will appear in the Folders Card in the
center of the screen.
2. Press the RIGHT arrow or SELECT. The focus will move to the Folders Card.
3. Use the UP or DOWN arrow to find a planned recording you want to review.
4. Press the RIGHT arrow or SELECT. The cards will shift to the left and the focus will move to the Actions Card in
the center. A Summary Card will appear on the left.
Change Recording Options for a
Single Program
You can view and revise the recording options
assigned to any scheduled single program
recording.
At the Actions Card, Edit Recording Options will be
highlighted.
1. Press SELECT. A dialogue box with the
recording options assigned to that program
will appear.
2. Adjust the settings using a combination
of the UP and DOWN arrows to highlight
individual settings and the SELECT button
to confirm. There are several different
settings you can change:
• Until: To keep the hard drive from filling up, which would prevent you from recording other shows, you can
set programs to delete when Space Is Needed or I Viewed any portion of the program. You can also choose
the “I Delete” option to save a show until you manually delete it.
• Start: You can set a recording to begin On Time or in one-minute increments between 1 and 5 minutes, as
well as 10 minutes, 15 minutes and 30 minutes before or after the program begins.
• End: You can set a recording to end On Time or in one-minute increments between 1 and 5 minutes, as well
as 10 minutes, 15 minutes, and 30 minutes before or after the program concludes. Additionally, you can
extend the end time of the recording by 1 hour, 2 hours, and 3 hours after the program concludes.
• Record To: The latest software upgrade from Cox now supports multiple DVRs that may be added to your
Whole Home DVR service. If you lease multiple DVRs for your Whole Home DVR service, then you will see
the Record To option. This option will allow you to select a DVR where the recording will be scheduled. For
more information on this useful service from Cox, see Chapter 9: Whole Home DVR.
3. Press B to accept your changes.
Review planned recordings, change settings and cancel
planned recordings from the Scheduled Recordings Menu.
Edit Recording Options lets you manage single
program recordings.
To Next Page
Loading...
