8
PAIR YOUR REMOTE
WITH THE RF DTA
1. Turn on the TV using your
TV’s existing remote or the
TV’s power button.
2. Hold the remote in
front of the mini box
(DTA) and press the
COX MENU button on
the remote.
3. Navigate to Customer
Support and press
the SELECT button
on the remote.
4. Navigate to Remote
Control Pairing and
press the SELECT
button on the remote.
5. Press and hold the
SETUP button for 3
seconds until the red
indicator light turns
on, then release.
6. Press the COX MENU
button. The red
indicator light on
the remote will blink
periodically.
7. Enter the 3-digit code
displayed on the TV. If the
code entered is correct, a
confirmation message will
be displayed on your TV.
8. Using your new remote,
try changing channels. If
this works, your remote is
now paired!
To Next Page
Loading...
