Front View
Click to enlarge.
After the gateway successfully registers on the network, the Power, Downstream,
Upstream, and Internet indicators illuminate continuously to indicate that the gateway is
online and fully operational.
Back View
Click to enlarge.
The Netgear CAX30 has the following ports available on the back of the gateway.
Reset – Restores the default factory settings. This button is recessed to prevent
accidental resets of your gateway.
Ethernet – Connect Gigabit Ethernet cables using these four ports.
USB 3.0 – Connect a USB storage device to the router using this port.
Cable – Connect a coaxial cable line using this port.
DC – Connect the power cable using this port.
To Next Page
Loading...