21
21
Filtration System
Important: The use of Clarifiers and Foam inhibitors is not recommended with Arctic Pure
®
Disposable filters!
Coyote Spas™ are equipped with balanced filtration, meaning that the filter cartridges are sized to
meet the needs of the pump system. As with any water filtering system, the filter cartridge may be-
come clogged, resulting in reduced water flow. It is important to maintain a clean, unobstructed filter
system. We recommend replacing your filter with an Arctic disposable filter every three (3) months.
Filter Cartridge Removal and Installation
1. Shut the spa down using the on/off button on the topside control panel. Wait until all pumps
have stopped completely (this may take up to 3 minutes).
2. Remove the filter basket by rotating the top outside ring counterclockwise and lifting.
3. Remove the filter cartridge.
4. Clean any debris out of the skimmer basket.
5. To reinstall the filter cartridge, reverse the order of steps in which it was removed.
Care of the Spa Shell
Your Coyote Spas™ has a fiberglass reinforced, cast acrylic shell. Stains and dirt generally will not
adhere to your spa’s surface. A soft cloth or sponge should easily remove most dirt. Most household
chemicals are harmful to your spa’s shell. Do not use them.
Sodium bicarbonate (baking soda) or vinegar can also be used for minor surface cleaning. Always
thoroughly rinse off any spa shell cleaning agent with fresh water.
Service Notes:
1. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Your Coyote
Spas™ Dealer stocks a Stain and Scale Inhibitor to use if your spa water has a high
concentration of dissolved minerals.
2. The use of alcohol or any household cleaners other than those listed to clean the spa shell
surface is NOT recommended. DO NOT use any cleaning products containing abrasives or
solvents since they may damage the shell surface. Damage to the shell by the use of harsh
chemicals in not covered under the warranty.
To Next Page
Loading...
