DC power input interface, connect to 12V/1A power adapter
Press and hold for more than 5 seconds, the router will restore
factory settings.
Press and hold for 3-5 seconds in the power-on state，the
router will enable WPS wireless connection status.
RJ45 network port, can be used as a LAN port
SIM card slot, only supports NANO SIM card
It is prohibited port, only used for debugging purposes.
Working Environments
To ensure proper functioning of the router, the operating environment is recommended as
follows:
a) Keep away from heat, maintain ventilation.
b) Lay equipment on flat surface.
c) Lay equipment in a dry environment without dust.
d) Dismantle power supply and all wirings in thunderstorm weather in case of lightning
stroke.
Note: please supply rated power for equipment. If unmatched power is supplied, the router
may get damaged.
To Next Page
Loading...