EasyManua.ls Logo

CPE 2 STROKE GENERATOR - Specifications and Parts; Technical Specifications

CPE 2 STROKE GENERATOR
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Rev 42011-20090428 13
Specifications
Engine Specifications
Engine 64 cc OHV CPE
Generator Specifications
Running Wattage 800 Watts
Starting Wattage 1000Watts
AC Load 120 V
DC Load 12 V
Phase Single
Frequency 60 Hz
Fuel Capacity 0.9 gallons (3.4 L)
Weight 40.8 lbs. (18.5 kg)
Height 14.37 inches (36.5 cm)
Width 12.2 inches (31 cm)
Length 13.78 inches (35 cm)
Fuel
Fuel capacity is 0.9 gallons (3.4L). Use
fuel/oil mixture - regular unleaded gasoline
with a minimum octane rating of 85 mixed
with 2-stroke engine oil at ratio of 50:1 (1
gallon fuel: 2.50z of oil).
Spark Plugs
Your generator comes equipped with a ¾”
long reach plug (19 mm)
Intermittent use (less than 1 hour/month) or
colder temperatures (below 60°F)
NGK B6ES or equivalent
Moderate use (less than 3 hours/month) or
seasonal temperatures (50-80°F)
NGK B7ES or equivalent
Extreme use (continuous) or hot climates
(80-100°F)
NGK B8ES or equivalent
Make certain the spark plug gap is 0.7 -
0.8mm (0.028 - 0.031 in.).

Related product manuals