Name: CPI CLS Advance
Brand: CPI
Rating: 5 (1 reviews)

To Next Page

Crane Payment Innovations | Coin House | New Coin Street, Royton | Oldham OL2 6JZ | UK

info@cranepi.com | www.cranepi.com | Phone: +44 161 678 0111

12.20 ATh/CHo/Roe/MAB

OM_CLS_-_EN_2-0

CLS Advance

CoinRecycler

Operators' Manual

Table of Contents2
Revision Protocol5
About6
About this Manual6
Text Conventions6
Additional Useful Technical Documentation6
About the CLS Coin Recycling System6
The CLS Features6
Scope of Delivery6
Necessary Accessories6
Safety Instructions7
Intended Use7
Protecting Persons and Equipment7
Disconnection from Supply7
Design & Function8
Overview8
Front View8
Rear View8
Fig. 1: CLS Front - Functional Elements8
Fig. 2: CLS Rear - Functional Elements8
Modular Layer Structure9
Fig. 3: Layer Structure9
Lid10
Upper Coin Acceptance Unit10
Lower Coin Acceptance Unit10
Fig. 4: CLS with Lid Opened Showing Upper Acceptance Unit from the Top10
Fig. 5: CLS with Upper Acceptance Unit Opened Showing Upper Acceptance Unit from the Bottom and10
Coin Payout Unit11
Fig. 6: CLS with Lower Acceptance Unit Opened Showing Payout Unit11
Product Label12
Model Number Decoding12
Fig. 7: Product Label12
Configuration Number Decoding13
Interfaces13
On-Off Switch13
Fig. 8: Detail: Interfaces, On-Off Switch and Upper Status Illumination13
Status Illumination14
Coin Input Funnel14
Fig. 9: Detail: Upper and Lower Status Illumination14
Fig. 10: Detail: Coin Input Funnel/Dust Tray and Coin Return Tray14
Centrifuge & Coin Transport Belt15
Coin Validator15
Coin Sorting Spiral15
Coin Payout Unit15
Fig. 11: Detail: Centrifuge, Coin Transport Belt, Coin Validator and Sorting Spiral15
Fig. 12: Detail: Coin Hopper, Payout Disc, Return Belt and Tray, Lower Status Illumination15
Payout Configuration & Capacity16
Fast Payout16
Fig. 13: Euro Configuration & Capacity16
Fig. 14: Detail: Coin Return Chute16
Coin Rejector Pin17
Acceptance, Sorting & Payout Control17
Fig. 15: Detail: Rejector Pin, Coin Return Conveyor and Tray17
Top Key Lock, Push-Button & Pull Handle18
Bottom Key Lock & Pull Handle18
Fig. 16: Detail: Top Key Lock, Push-Button, Pull Handle18
Fig. 17: Detail: Bottom Lock and Pull Handle18
Coin Path & Sensor Monitoring19
Coin Input Funnel19
Fig. 18: Coin Input Funnel Providing Three Photoelectric Sensors19
Coin Validator and Sorting Spiral20
Fig. 19: Centrifuge, Coin Validator Providing Several Measurement Sensors, Coin Rejector Pin20
Fig. 20: Sorting Spiral Providing Sorting Control Sensors Detecting Coins Falling into the Hoppers21
Coin Hoppers and Coin Return Tray22
Fig. 21: Hopper Providing Coin Ejector Lever and Payout Control; Coin Return Tray with Full Sensor22
Getting Started23
Selecting an Installation Site23
Unpacking the CLS23
Fixing the CLS against Theft and Unwanted Shifting23
Fig. 23: Rear Cutouts for Fixing23
Fig. 22: Bottom Threaded Inserts for Fixing23
Putting the CLS into Service24
Fig. 24: Detail: Interfaces, On-Off Switch and Upper Status Illumination24
Fig. 25: Switching CLS On/Off25
Fig. 26: Top Key Lock, Push-Button and Pull Handle26
Fig. 27: Open Lid26
Fig. 28: Bayonet Mount Properly Closed27
Fig. 29: Coin Validator Arm Lifted27
Fig. 30: Disconnecting Bayonet Mount28
Fig. 31: Bayonet Mount Disconnected28
Fig. 32: Open Acceptance Unit28
Fig. 33: Bottom Key Lock and Pull Handle29
Fig. 34: Open Payout Unit29
Fig. 35: Removing a Hopper30
Fig. 36: a Hopper's 3 Latching Points30
Fig. 37: Front Hopper Bail Handles Tilted Correctly (Towards the Lid)30
Fig. 38: Hopper Filling Via Coin Input Funnel32
Fig. 39: Direct Hopper Filling32
Fig. 40: Raising Coin Return Tray33
Fig. 41: Bottom Status Illumination with Coin Return Tray Raised33
Fig. 42: Loosening and Removing Funnel Insert35
Fig. 43: Reinserting Funnel Insert35
Fig. 44: Surfaces to be Cleaned, if Necessary Remove Funnel Insert36
Fig. 45: Lifting the Clip and Folding down the Dust Tray for Cleaning37
Fig. 46: Unhinging the Dust Tray for Cleaning37
Fig. 47: in Case of a Coin Jam: Green Coins into the Hoppers, Red Coins to be Taken out of the System38
Fig. 48: Pulling Coin(S) Jammed (Red) out of the Payout Slot39
Fig. 49: Checking Payout Slot Protective Flap for Easy Movement39
Fig. 50: Removing Hopper Bowl and Payout Disk40
Fig. 51: Reinstalling Hopper Bowl40
Fig. 52: Detail: Upper and Lower Status Illumination46

Questions and Answers:

Need help?

Do you have a question about the CPI CLS Advance and is the answer not in the manual?

CPI CLS Advance Specifications

General

Brand	CPI
Model	CLS Advance
Category	Cash Counters & Coin Sorters
Language	English

Related product manuals

CPI GRYPHON

223 pages

CPI Talos T6

18 pages

CPI CLS Advance User Manual

Table of Contents

Questions and Answers:

CPI CLS Advance Specifications

Related product manuals