EasyManua.ls Logo

CPI STEMSHINE - Brush Changeout Procedures

CPI STEMSHINE
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page - 16 SALES + SERVICE
CPIGP8AOPINST (866) 912-3469
WWW.CPISHINE.COM
BRUSH CHANGEOUT PROCEDURES :
Approximately once per year, the brushes should be replaced due to normal wear and tear. This is an
easy task to accomplish. Procedures follow.
The GP8 is equipped with 8 colour coded brushes – 3 red; 2 green and 3 yellow. The brushes are
comprised of a very durable, absorbent polystyrene. They were designed with two parts – the base
brush and then an interchangeable tip. This tip will essentially double the life of the brush.
Whether you are changing out an entire brush or replacing just a “tip” proceed as follows:
Ensure the unit has been turned off and is unplugged.
Remove the brush from the support by rotating the brush in a counter
clockwise direction while gently pulling it upwards.
Remove the brush completely by slipping it off its support.

Related product manuals