Page - 18 SALES + SERVICE
CPIGP8AOPINST (866) 912-3469
WWW.CPISHINE.COM
Fit the new tip into the brush and turn until tight. DO NOT HOLD ONTO THE FRINGE WHILE
TURNING AS THIS MAY DAMAGE THE BRUSH. Use the pliers to tighten the tip until the last
thread is almost flush with the brush edge.
Replace the brushes on their color coded supports (red, green and yellow). Turn the brush in
a clockwise direction to lock in place. Be sure that the brushes are correctly inserted onto the
spindles
To Next Page
Loading...
