CPS COLOR COROB FIRST1

Questions and Answers

E
eddie28Aug 5, 2025
What to do if the CPS COLOR Dispenser management software shows a communication error?
- A
  Allison JohnsonAug 5, 2025
  If the management software shows an error in the communication protocol for your CPS COLOR Dispenser, first ensure the machine is turned on. Then, verify all connections at the back of the machine. Use the configuration and calibration software to confirm that the port used for communication is correctly configured. If the issue persists, replace the communication cable with manufacturer’s original spare parts.
D
David CollinsAug 16, 2025
How to fix a CPS COLOR COROB FIRST1 that does not turn on?
- L
  lauracowanAug 16, 2025
  If your CPS COLOR Dispenser does not turn on, check the power connections at the back of the machine and ensure the main switch is in the ON position (I). Also, inspect the fuses inside the fuse compartment and replace any that are blown. If the power supply unit is in overcurrent, wait a few minutes before restarting the machine. If problems persist after these steps, it may indicate defective electrical connections.
M
Megan BurtonAug 27, 2025
Why is the ON lamp blinking fast on my CPS COLOR Dispenser and it's not responding?
- S
  Sheila HensonAug 27, 2025
  If the ON lamp blinks fast and the CPS COLOR Dispenser refuses commands, it might be because the off-line button is pressed. Push the off-line button to bring the machine back to the on-line condition.

Summary

1 GENERAL INFORMATION

1.1 Purpose and use of this manual

Explains the manual's purpose, scope, and conventions used throughout the document.

1.1.1 Conventionally used graphics

Details the meaning of graphical conventions like boldface for emphasis and warning icons.

1.2 Definitions

Defines key terms such as Operator and Maintenance Technician for operational clarity.

2 FEATURES

2.1 Description of the machine

Provides an overview of the automatic dispenser and its main components.

2.2 Description of units

Details the specific parts of the machine like canisters, turntable, and nozzles.

2.3 Usable cans

Specifies the permissible dimensions and weight limits for cans used with the machine.

2.4 Intended use

Defines the professional purpose and recommended usage guidelines for the dispenser.

2.5 Identifying information

Lists the information found on the machine's identification plate.

3 SAFETY

3.1 Safety warnings and unauthorized use

Outlines compulsory and prohibited safety actions, including electrical hazards.

3.2 Warnings on the use of colorants

Provides critical safety instructions for handling colorants and associated risks.

3.3 Residual risks

Identifies potential residual risks and their corresponding preventive measures and PPE.

3.4 Position of labels

Illustrates the location of important safety and instruction labels on the machine.

3.5 Requirements of the installation site

Specifies environmental conditions required for safe and optimal machine installation.

4 SHIPPING AND HANDLING

4.1 General warnings

Covers general safety precautions necessary for handling and moving the machine.

4.2 Unpacking and placement

Provides step-by-step instructions for safely unpacking and positioning the machine.

4.2.1 Standard material supplied

Lists the standard items typically included with the machine in its packaging.

4.3 Storage

Offers guidance on how to store the machine safely and properly.

4.4 Disposal and recycling

Details procedures for environmentally sound disposal and recycling of the equipment.

5 START-UP

5.1 General warnings

Highlights essential safety precautions related to powering up and grounding the equipment.

5.2 Management computer

Describes the role and placement of the computer used for managing the dispenser.

5.3 Control devices and connections

Identifies and explains the function of the machine's main controls and connection ports.

5.4 Electrical connection and start-up

Guides the user through the process of connecting the machine electrically and initiating startup.

5.5 Initialization

Explains the mandatory initial setup procedure required before the machine can operate.

5.6 Use of the off-line button

Details the function and usage of the off-line button for interrupting machine operations.

5.7 Shut-down

Provides recommendations on the proper procedure for shutting down the machine.

6 USING THE DISPENSER

6.1 General warnings

Covers safety precautions that operators must observe while using the dispenser.

6.2 Running the machine

Outlines the basic steps for operating the machine guided by the management software.

6.2.1 Adjusting the can shelf height

Instructs on how to adjust the can shelf to accommodate different can sizes.

6.2.2 Loading the can

Details the correct procedure for placing a can onto the shelf for dispensing.

6.2.3 Dispensing

Explains the dispensing process, turntable movement, and nozzle cleaning.

6.3 Automatic processes

Describes automatic processes like colorant stirring for preservation and homogeneity.

6.4 Refilling the canisters

Provides a comprehensive guide for refilling the colorant canisters.

6.5 Troubleshooting

7 ORDINARY MAINTENANCE

7.1 General warnings

Emphasizes safety precautions to be taken before performing any maintenance.

7.2 Maintenance table

Presents a schedule for routine maintenance operations based on frequency and conditions.

7.3 External cleaning

Details the procedure for cleaning the exterior surfaces and controls of the dispenser.

7.4 Refilling the liquid of the cleaning brush

Instructs on checking and refilling the liquid for the automatic cleaning brush.

7.5 Cleaning the drip ducts

Provides steps for cleaning the drip ducts of the machine.

7.6 Washing or replacing the nozzles

Offers guidance on washing or replacing the dispensing nozzles, with a caution.

8 TECHNICAL SPECIFICATIONS

8.1 Technical data

Lists the machine's detailed technical specifications, including electrical and environmental data.

8.2 Dimensions

Provides the physical measurements and dimensions of the machine.

8.3 Declaration of conformity

References the attached declaration of conformity for regulatory compliance.

8.4 Warranty

Explains the warranty terms, validation process, and conditions that may void it.