To Next PageTo Next Page
Need help?Do you have a question about the CPS FT800FN Series and is the answer not in the manual?
General| Power Source | 2 x AAA batteries |
|---|---|
| Type | Non-contact voltage tester |
| Indicator | LED and audible alarm |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
Forms a burr-free 45° flare, suitable for soft materials like copper and aluminum.
FT800FN is specifically designed for R-410A systems.
Features heat-treated, black oxide finished steel flaring bars and a precision machined yoke assembly with 3/8" sq. drive.
Includes a professional grade 3/8" sq. drive ratchet and a protective carrying case.
Prepare the tool by moving the yoke and clamp handles counter-clockwise. Insert the tube into the flaring bar hole.
Align the yoke with the positioning mark, tighten the clamp handle, and turn the yoke handle clockwise until the clutch releases.
Turn the yoke handle counter-clockwise to release from the tubing, loosen the clamp, and remove the tube.
Always wear eye protection and hand gloves when working with hand tools.
Keep the circular cone clean and apply lubricating grease to threaded parts and the bearing.
Lists R-410A bars, standard imperial and metric bars, 3/8" sq. drive ratchet, and yoke assembly.
