Need help?Do you have a question about the CR Laser SUPER-3S and is the answer not in the manual?
General| Brand | CR Laser |
|---|---|
| Model | SUPER-3S |
| Category | DJ Equipment |
| Language | English |
Lists items included in the package.
Warning about direct eye exposure and skin damage from laser radiation.
Emphasizes qualified personnel for installation to prevent injuries and property damage.
Instructions to check power supply settings before connecting power to the fixture.
Details the pin assignments for DMX input and output XLR connections.
Explains how to connect multiple fixtures in a serial DMX chain for control.
Identifies and describes the functions of the rear panel components and ports.
Identifies and describes the functions of the front panel components and indicators.
Advises on regular breaks, avoiding frequent power cycling, and unplugging when not in use.
Introduces the five different operating modes available for the unit.
Explains how to configure the unit for music-controlled operation.
Details how to connect multiple units for master/slave operation.
Describes how to set up the unit for automatic operation.
Explains how to set up and use the unit in DMX control mode.
Details how to control the unit using the ILDA interface and PC.
Lists the functions controlled by each DMX channel and their value ranges.
Outlines key points to check during the device's inspection.
Provides instructions for cleaning internal and external optics and the unit.
To Next Page