CRAFFT CFW145T - Filter Cleaning Procedures; Cleaning the Lint Filter; Cleaning the Water Inlet Filter

13
HOW TO CLEAN THE FILTER
1Pull the power
plug out before
cleaning it.
2Turn off the water
supply to the
washer and
sperate the inlet
hose.
3Pull the inlet filter
out.
4Remove the dirt
from the inlet
filter with a brush.
Cleaning the water inlet filter
• Clean the filter when water leaks from, the water inlet.
Cleaning the Lint Filter
Type II : It is assembled in the middle area of Tub.(Option)
• This washer has two type of lint Filter in order to increase lint filtering performance.
Type I : It is assembled in the top area of Tub.
3
Return the filter as it was, and
insert the filter frame into the
slot.
1
Pull the Filter frame
upward.
2
Turn the lint filter
inside out, wash to
the lint off with water.
Filter Frame
Lint Filter
1
Pull the button with pulling
upward.
2
Open the Cover and get rid of
lint being the Inside of Filter
then close the Cocer.
3
Assemble the Lint Filter as it
was, by pushing toward wall
with fixing slot