Need help?Do you have a question about the Crafstman 139.57915 and is the answer not in the manual?
Assess Wi-Fi signal strength at installation location before proceeding.
Review safety symbols, signal words, and prepare the garage door for installation.
Identify required tools and survey the garage area for installation planning.
Check opener carton contents and organize all hardware for assembly.
Connect rail sections and install the trolley assembly onto the rail.
Securely attach the assembled rail to the opener motor unit.
Install the idler pulley assembly into the front rail section.
Route, connect, and tension the drive belt around pulleys and sprocket.
Install the protective cover over the drive sprocket assembly.
Crucial safety warnings and guidelines to follow before and during installation.
Determine location and securely mount the header bracket to structural support.
Place the opener unit in position and securely hang it from structural supports.
Install lights, emergency release, door bracket, and connect door arm.
Mount door control, install safety sensors, and ensure correct electrical connections.
Introduction to electronic controls for setup and travel adjustments.
Set the open and close limits for the garage door opener.
Verify the door reverses upon contact with an obstruction.
Connect opener to Wi-Fi and set up the smartphone app for remote control.
Critical safety guidelines for operating the garage door opener.
Explanation of features like Timer-to-Close, Smart Control, Lights, and Energy Conservation.
Synchronize and operate the wall-mounted door control panel.
Configure the motion-detecting control panel settings.
Perform monthly and yearly maintenance, and replace remote battery.
Interpret flashing LED codes to identify and resolve opener issues.
Address issues not in diagnostic codes and learn about repair protection agreements.
Lists of replacement parts for rail assembly, installation, and motor unit.
Details on optional accessories and the product's limited warranty coverage.
Assess Wi-Fi signal strength at installation location before proceeding.
Review safety symbols, signal words, and prepare the garage door for installation.
Identify required tools and survey the garage area for installation planning.
Check opener carton contents and organize all hardware for assembly.
Connect rail sections and install the trolley assembly onto the rail.
Securely attach the assembled rail to the opener motor unit.
Install the idler pulley assembly into the front rail section.
Route, connect, and tension the drive belt around pulleys and sprocket.
Install the protective cover over the drive sprocket assembly.
Crucial safety warnings and guidelines to follow before and during installation.
Determine location and securely mount the header bracket to structural support.
Place the opener unit in position and securely hang it from structural supports.
Install lights, emergency release, door bracket, and connect door arm.
Mount door control, install safety sensors, and ensure correct electrical connections.
Introduction to electronic controls for setup and travel adjustments.
Set the open and close limits for the garage door opener.
Verify the door reverses upon contact with an obstruction.
Connect opener to Wi-Fi and set up the smartphone app for remote control.
Critical safety guidelines for operating the garage door opener.
Explanation of features like Timer-to-Close, Smart Control, Lights, and Energy Conservation.
Synchronize and operate the wall-mounted door control panel.
Configure the motion-detecting control panel settings.
Perform monthly and yearly maintenance, and replace remote battery.
Interpret flashing LED codes to identify and resolve opener issues.
Address issues not in diagnostic codes and learn about repair protection agreements.
Lists of replacement parts for rail assembly, installation, and motor unit.
Details on optional accessories and the product's limited warranty coverage.
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Remote Control | Yes |
| LiftMaster Compatibility | Yes |
| Max Door Height | 7 ft |
| Voltage | 120V |
| Security | Rolling Code |
To Next Page
