Craftex CX507 - Features

5
MODEL CX507 – 16" OPEN END DRUM SANDER
As part of the growing line of Craftex CX-Series woodworking equipment, we are proud to offer
CX507 a 16" Open End Drum Sander. By following the instructions and procedures laid out in
this user manual, you will receive years of excellent service and satisfaction. The CX507 is a
professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor ........................................... 1HP 110Volt, 60-Hz, Single Phase
Conveyor Belt Feed Motor........... 1/15HP
Maximum Sanding Width............. 16"
Maximum Work-piece Height....... 5"
Maximum Sanding Depth ............ 1/32"
Feed Speed................................. 2 - 10 FPM
Number of Sanding Drums.......... One
Drum Speed ................................ 1,720 RPM
Dust Hood Outlet......................... One 2-1/2"
Dimensions.................................. 14" x 28" x 27"
Weight ......................................... 50 Kg
Warranty...................................... 3 Years
CX507 - 16" SANDER
FEATURES