Craftmade UC7224T4 - User Manual

Page: 1/4
Model : UC7224T4
INSTRUCTIONS FOR OPERATION
SETING THE OPERATING CONTROLS
1. This unit operates on 23A a 12 volts battery (not included).
To prevent possible damage if the battery should leak , be sure to remove
the battery when the unit is not use .
2. This device whichone of black linesser ieswith AC 120V power supply.
the color of the ground wire is kelly.
3. Store the controller away from excess heat or humidity .
4. This remote control unit is required with 24bit code combinations. To prevent
possible interference from or to other remote units such as garage door
openers, car alarm or security system . If you find that your fan and light
kit go on and off without using your control , simply change the combination
code in your transmitter and receiver .
5. Operation buttons on the panel of transmitter .
key– For fan HIGH speed control.
key– For fan MEDIUM speed control.
key– For fan LOW speedcontrol.
key– For fan OFF speedcontrol.
OR OR key– For light brightness and light ON/OFF control.

Summary

Operating Controls Setup

Remote Unit Power and Placement

Unit operates on 12V battery; store away from heat/humidity.

Remote Control Code Combination

Requires 24bit code combination to prevent interference with other remote units.

Transmitter Button Functions

Details functions of HIGH, MED, LOW, OFF, L-1, L-2, and DIM ON buttons for fan and light control.

Fan and Light Operation

Power Switch Function

Controls the main power ON/OFF for the fan and light.

Fan Speed Control

Instructions for starting and turning off the fan using the control buttons.

Light Brightness and ON;OFF Control

Controls light on/off and brightness, with auto-resume feature.

Fan Speed Controller Installation and Operation

Setting Transmitter Code

Procedure to set the code within 60 seconds of turning on AC power.

Federal Communications Commission Statement

Modification and RF Exposure Compliance

Warnings against unauthorized modifications and antenna changes for FCC compliance.

Interference Statement

Limits for Class B digital devices and measures to correct interference.

Canadian Compliance Notices

Device compliance with Industry Canada licence-exempt RSS standards.

Radio Frequency Exposure Information

RF Exposure Limits and Usage

Information on radiated output power and minimizing human contact during operation.

Craftmade UC7224T4 Specifications

General

Brand	Craftmade
Model	UC7224T4
Category	Control Systems
Language	English