This document is an installation and user manual for a Craftmade Utility ceiling fan, model UT56. It provides comprehensive instructions for unpacking, assembling, wiring, and operating the fan, along with safety tips, troubleshooting, and warranty information.
The Craftmade Utility fan is designed for indoor use and is suitable for rooms up to 400 square feet (37.2 square meters). Its primary function is to circulate air, providing cooling in warmer conditions. The fan features three blades and is controlled by a wall-mounted unit that allows for five different speed settings, in addition to an OFF position.
Function Description:
The Craftmade Utility fan operates by rotating its three blades to move air within a room. The wall control unit enables users to select from five distinct fan speeds, ranging from low to high, to adjust the airflow according to their comfort needs. The fan is designed for downrod installation on a regular (non-sloped) ceiling, ensuring optimal performance and safety. It cannot be installed as a flushmount or on angled/vaulted ceilings.
Usage Features:
- Wall Control Operation: The fan is operated via a dedicated wall control unit. This unit has a dial or buttons to select from five fan speeds (1-5) and an OFF (0) setting.
- '0' turns the fan OFF.
- '1' turns the fan to LOW speed.
- '2' turns the fan to MEDIUM-LOW speed.
- '3' turns the fan to MEDIUM speed.
- '4' turns the fan to MEDIUM-HI speed.
- '5' turns the fan to HI speed.
- Downrod Installation: The fan is specifically designed for downrod mounting on flat ceilings. This ensures proper clearance between the blades and the floor, as well as from walls or other obstructions, which is crucial for safe and efficient operation. The manual emphasizes that the fan cannot be installed on sloped or vaulted ceilings, nor as a flushmount.
- Safety Cable: A safety cable is provided and its installation is mandatory. This cable acts as an additional safety measure, preventing the fan from falling in the unlikely event of a primary mounting failure. The safety cable must be securely attached to a robust structural point, such as a wood ceiling joist, using appropriate hardware. The length of the safety cable is adjustable to ensure it provides adequate slack without being excessively loose.
- Clearance Requirements: For safe and effective operation, the fan blades must have at least ten feet (3.05 meters) of clearance from the floor and at least thirty inches (76 centimeters) from any walls or upright structures. This ensures unobstructed airflow and prevents accidental contact with the rotating blades.
- Electrical Connection: The fan requires a properly grounded electrical connection. The manual provides detailed wiring diagrams for connecting the fan to the house wiring and the wall control unit. It specifies the use of ETL or UL listed outlet boxes marked "FOR FAN SUPPORT" and warns against using plastic outlet boxes or those not rated for fan support. Wire connectors are provided, and it is recommended to wrap each connection with electrical tape for added safety.
- Pre-assembled Components: The motor housing, downrod, and canopy come pre-assembled, simplifying the initial stages of installation. This reduces the number of individual parts the user needs to handle and assemble, streamlining the process.
- Parts Inventory: A clear parts inventory is provided, including a j-hook hanging bracket, three blades, three blade arms, a wall control, and hardware packs. This allows users to verify that all necessary components are present before beginning installation.
Maintenance Features:
- Cleaning: The fan should be cleaned using a dry dust cloth or a lightly dampened cloth. The manual explicitly warns against using water or detergents, as these can damage the fan or its blades. Regular dusting helps maintain the fan's appearance and prevents dust buildup from affecting performance.
- Blade Arm Screw Tightening: It is recommended to tighten the large screws securing the blade arms to the motor housing twice a year. This helps ensure the blades remain securely attached and prevents any wobbling or noise that might develop over time due to vibrations.
- Troubleshooting Guide: The manual includes a troubleshooting section to assist users if the fan fails to operate. This section provides solutions for common issues, such as checking power to the fan, verifying proper fan wiring, and ensuring the wall control is correctly wired. This self-help guide can often resolve problems without the need for professional assistance.
- Parts Replacement Information: For any necessary parts replacement, the manual directs users to the "Parts Inventory" section for reference and provides Craftmade Customer Support contact information (phone number and website). This ensures users can easily obtain replacement parts if needed, extending the lifespan of the fan.
- Warranty Information: The fan comes with a Craftmade Lifetime Limited Warranty, which includes a 1-year warranty for faulty performance due to material or workmanship defects, a 5-year warranty for the fan motor, and a 6-year to lifetime limited warranty covering labor for motor failures. This comprehensive warranty provides peace of mind and outlines the terms for repair or replacement of components. The warranty specifically excludes damage from mechanical, physical, electrical, or water abuse, as well as deterioration of finishes or other parts due to time or exposure to salt air.
The Craftmade Utility fan is designed with both functionality and user convenience in mind, offering a reliable and controllable air circulation solution for various indoor spaces. The detailed instructions and safety warnings in the manual are crucial for ensuring a correct and safe installation, as well as for maintaining the fan's performance over time.
To Next Page
Need help?
General
