Craftsman 139.18802 User Manual

3-BUTTON REMOTE CONTROLS
MODELS 139.18802 AND 139.18803
To prevent possible SERIOUS INJURY or
DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of
reach of children. NEVER permit children
to operate or play with remote controls.
• Activate gate or door ONLY when it can be
seen clearly, is properly adjusted and there
are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight
until completely closed. NEVER permit
anyone to cross path of moving gate or
door.
For use with Craftsman 315 MHz or 390 MHz garage door openers manufactured after
January 1, 1993. The garage door opener activates when the programmed button on the
remote control is pressed. The remote control can activate up to three garage door openers.
Make sure the garage door opener has a working light bulb because it is a programming
indicator.
LED
LED
Locate the Program button on the
remote control.
Locate the Learn
button on the garage
door opener.
NOTE: Your garage door
opener may look different.
OR OR
Learn
LED
Learn
LED
Learn
LED
Green
or
Red/Orange
Purple
Yellow
Program Button
Program Button
4
Press and release the Learn
button on the garage door
opener.
3
To exit programming mode,
press any remote control
button except the button
that was just programmed.
Install the visor clip.
7
Press the remote control button
programmed in step 2 until the
garage door opener lights flash
or two clicks are heard.
To test, press the programmed
button on the remote control...
1
Within 30 seconds...
The Learn LED will light.
56
Press and hold the program button
the remote control until the LED on
the front of the remote control
turns on.
Learn
Button
Click
Click
The garage door
opener will activate.
2
Press and release the remote control button you wish to use the
number of times that corresponds with the garage door opener type:
# of Presses Garage Door Opener Type
1
2
3
4
Security+ 2.0
TM
(Yellow Learn Button)
315 MHz Security+
®
(Purple Learn Button)
390 MHz Security+
®
(Red/Orange Learn Button)
390 MHz Billion Code (Green Learn Button)
MODEL 139.18802
PREPARE
PROGRAM THE REMOTE CONTROL (139.18802)
MODEL 139.18803
139.18802
139.18803

Craftsman 139.18802 Specifications

General

Brand	Craftsman
Model	139.18802
Category	Remote Control
Language	English

Summary

3-BUTTON REMOTE CONTROLS MODELS 139.18802 AND 139.18803

General Safety Warnings

Crucial safety instructions to prevent injury or death from moving gates/doors.

Prepare for Remote Control Programming

Locate Garage Door Opener Learn Button

Identify the Learn button, often indicated by an LED, on your garage door opener unit.

Locate Remote Control Program Button

Find the program button on the front of the remote control.

Program Craftsman Remote Control (Model 139.18802)

Initiate Programming Mode

Press and hold the remote's program button until its LED illuminates.

Select Remote Button and Opener Type

Press remote button per opener type for correct signal transmission.

Exit Programming Mode

Press any remote button except the programmed one to exit the mode.

Activate Garage Door Opener

Press the opener's learn button, then the programmed remote button.

Test Remote Functionality

Press programmed button to activate opener; check for light flashes or clicks.

Install Visor Clip

Attach the visor clip for convenient remote storage.

Program Craftsman Remote Control (Model 139.18803)

Initiate Programming Mode

Press and hold the remote's program button until its LED illuminates.

Select Remote Button and Opener Type

Press remote button per opener type for correct signal transmission.

Exit Programming Mode

Press any remote button except the programmed one to exit the mode.

Activate Garage Door Opener

Press the opener's learn button, then the programmed remote button.

Test Remote Functionality

Press programmed button to activate opener; check for light flashes or clicks.

Battery Replacement and Warnings

Battery Replacement Procedure (139.18802)

Open the case and replace the battery with the positive side up.

Battery Replacement Procedure (139.18803)

Use a screwdriver to pry open the case and replace the battery.

Battery Safety Warnings

Keep batteries from children, notify doctor if swallowed, avoid fire risks.

FCC and IC Compliance Notice

Advises against unauthorized modifications and notes FCC testing compliance.