To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 139.5399 and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Remote Control | Yes |
| Remote Controls Included | 1 |
| Battery Backup | No |
| Max Door Height | 7 ft |
| Safety Features | Auto-reverse |
| Voltage | 120V |
Explains the meaning of safety symbols and signal words used in the manual to alert users to hazards.
Highlights crucial safety warnings regarding garage door balance, tension, and locks during preparation.
Emphasizes safety concerns for one-piece doors, especially regarding the gap to the floor and the reversal system.
Lists critical safety rules and precautions to follow before and during the installation of the garage door opener.
Guides on how to find the correct position for the header bracket on sectional garage doors.
Provides instructions for securely attaching the header bracket to a wall structure.
Details the electrical requirements, including grounding and permanent wiring considerations for safe operation.
Provides instructions for installing and aligning the safety reversing sensors for reliable door operation.
Explains the process of aligning the safety sensors to ensure proper beam detection for safe operation.
Details how to adjust the upward travel limit to ensure the door opens to the desired position.
Explains how to adjust the downward travel limit for proper door closure.
Guides on setting the correct force required for the opener to close the garage door safely.
Explains how to set the appropriate force for the opener to open the garage door smoothly.
Details how to test the safety reversal system using an obstruction to ensure it functions correctly.
Explains how to test the Protector System to confirm the safety reversing sensors are working properly.
Addresses issues where the opener does not respond to controls or operates intermittently.
Covers problems related to the door not opening/closing completely or reversing unexpectedly.
