To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 170.172440 and is the answer not in the manual?
Guidelines for maintaining a safe work area and general electrical safety precautions.
Operator alertness, proper attire, and avoiding distractions during use.
Proper switch use, power disconnection, and safe handling practices.
Precautions for handling the tool near wiring, securing work, and bit safety.
Best practices for cutting, bit handling, and awareness of dust hazards.
Identifies and labels the parts of the cutting tool for these models.
Identifies and labels the parts of the cutting tool for this model.
Steps for removing and installing the depth guide assembly.
Procedure for inserting bits into keyless chuck systems.
Procedure for inserting bits into standard collet systems.
Guide on how to switch between different collet sizes for bits.
Steps for attaching and removing the hard auxiliary control handle.
Steps for attaching and removing the soft handle for better grip.
Steps for securing the attachment to the tool base guide.
How to set the guide height and pivot point for desired cuts.
Guidance on making pilot holes and cutting circles with the attachment.
Instructions for using the bump-off slide switch to turn the tool on/off.
How to adjust the speed using the control dial for optimal cutting.
Steps for setting the depth guide for precise cuts.
Information about the integrated worklight for improved visibility.
Recommendations for making practice cuts before actual use.
Illustrated guide for making cut-outs in drywall for electrical boxes.
Advice on professional service for potential hazards.
Guidance on lubricating the tool's gears and chuck for smooth operation.
Information on brush and bearing maintenance for peak efficiency.
Instructions and warnings for cleaning the cutting tool safely.
Lists available attachments like cut off, circle cutting, and jigsaw handles.
Describes multi-purpose, drywall, and carbide tile bits for different materials.
General
