Craftsman CMXPTSG1013NB User Manual

3-in Cutoff Tool
Herramienta de corte de 3 pulg.
Outil à tronçonner de 3 po
CMXPTSG1013NB
INSTRUCTION MANUAL | GUIDE D’UTILISATION | MANUAL DE INSTRUCCIONES
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM

Craftsman CMXPTSG1013NB Specifications

General

Brand	Craftsman
Model	CMXPTSG1013NB
Category	Cutter
Language	English

Summary

Compressor Requirements

Operating

Forward and Reverse Control

Starting and Stopping the Tool

Replacing Cutting Disc

Initial Disc Removal Steps

Steps to begin removing the cutting disc using spindle lock.

Disc Fastener Removal

Steps to loosen and remove the hex key bolt and hex nut.

New Disc Installation

Steps to install a new cutting disc and tighten fasteners.

Maintenance

Lubrication

Troubleshooting

Spindle Lock Issues

Tool Performance Problems

Diagnosing and correcting issues like slow operation or no operation.

Warranty Information

Three Year Limited Warranty

Exploded Tool Diagram

Parts List