To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 183.172520 and is the answer not in the manual?
Details the terms and conditions of the one-year warranty for the cutting tool.
Warns about hazardous chemicals in dust created by certain activities.
Lists key specifications including motor power, speed, and tool weight.
Advises on proper circuit protection and cord safety for electrical hazards.
Provides essential safety rules for operating power tools safely.
Details crucial safety measures including tool handling and protective gear.
Ensures tool and workpiece are ready for safe cutting operations.
Outlines critical steps for safe and effective cutting with the tool.
Explains the double insulation feature and requirements for polarized outlets.
Warns against body contact with grounded surfaces and using the tool in wet conditions.
Provides guidelines for cord maintenance and selecting appropriate extension cords.
Lists recommended accessories for the cutting tool, including bits and guides.
Warns against using non-designed accessories to avoid injury or tool damage.
Instructions for unpacking and verifying all components against the parts list.
Lists all included cutting tool components with their corresponding keys and quantities.
Identifies and illustrates the various parts and components of the cutting tool.
Explains the operation of the tool's ON/OFF switch and speed control.
Provides detailed steps for safely inserting and tightening cutting bits into the collet.
Details the function of the integrated work lights for improved visibility.
Offers advice on selecting the correct motor speed for different cutting tasks.
Guides on how to safely remove and replace collet inserts for different bit sizes.
Step-by-step instructions for attaching and adjusting the freehand sole plate accessory.
Recommends making practice cuts to familiarize with the tool's operation.
Provides general advice and tips for achieving better cutting results and tool longevity.
Introduces the process of cutting electrical outlet openings in drywall.
Details the specific steps and safety precautions for cutting drywall outlet openings.
Provides instructions for attaching the precision handle accessory to the tool.
Explains how to adjust the cutting depth when using the precision handle.
Provides instructions for attaching the circle cutter accessory to the sole plate.
Guides on how to operate the circle cutter for precise circular cuts.
Provides instructions for attaching the plunge router base accessory to the tool.
Explains how to set a single, specific depth for plunge router cuts.
Details how to pre-set multiple cutting depths using the plunge router base.
Guides on tilting the router base for making bevel cuts at specific angles.
Instructions for performing freehand cutting operations using the router base.
Guidance on using the router base for various freehand routing projects.
Explains how to use a straight edge template for cutting straight lines.
Instructions for using a template to guide the router base for curved cuts.
Provides guidelines for safely cleaning the exterior of the cutting tool.
Addresses cleaning needs for tools used with abrasive materials.
Details maintenance and safety precautions for the tool's power cord.
States that the tool requires no further lubrication under normal conditions.
Illustrates the main unit of the cutting tool with numbered parts for reference.
Lists all parts for the main unit with part numbers, names, and quantities.
Lists all parts for the freehand soleplate assembly with keys and quantities.
Lists all parts for the handle assembly with keys and quantities.
Lists all parts for the circle cutter assembly with keys and quantities.
Illustrates the router assembly with numbered parts for reference.
Lists all parts for the router assembly with keys and quantities.
General
