EasyManua.ls Logo

Craftsman 247.27775 SERIES User Manual

Craftsman 247.27775 SERIES
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator’s Manual
Z6000 SERIES
ZERO-TURN RIDER
Model Nos. 247.20411* & 247.27775*
For answers to your questions about
these products, call:
1-888-331-4569
Craftsman Customer Hot Line
This product has a low emission engine which operates differently
from previously built engines. Before you start the engine, read
and understand this Craftsman Operator’s Manual and the Engine
Operator’s Manual.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Visit our website: www.craftsman.com
CAUTION
Before using this equipment,
read this manual and follow
all safety rules and operating
instructions.
Off-Season Storage ........................................................25
Troubleshooting ..............................................................26
Español............................................................34
Service Numbers ............................................Model/
Warranty Supplement
Safe Operation Practices .................................................2
Slope Gauge ...................................................................6
Assembly .......................................................................7
Operation ..................................................................... 11
Service and Maintenance ..............................................20
O-Season Storage .......................................................30
Troubleshooting ........................................................... 31
Español ........................................................................33
Warranty/Service ....................... See Separate Supplement
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model
depicted may differ from yours.
* -- Last digit of model number varies
Form No. 769-11975A
(December 7, 2016)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Craftsman 247.27775 SERIES and is the answer not in the manual?

Craftsman 247.27775 SERIES Specifications

General IconGeneral
Cutting Height Positions6
Deck MaterialSteel
Mulching CapabilityYes
Bagging CapabilityYes
Side Discharge CapabilityYes
Starter TypeRecoil
Cutting Width21 inches
Cutting Height1.25-3.75 inches
Drive TypeRear-wheel drive
Wheel Size8 inches (front), 11 inches (rear)

Summary

Safety Instructions

Slope Operation Safety

Explains safe practices for operating on slopes to avoid tip-overs and loss of control.

Children and Bystander Safety

Emphasizes keeping children and bystanders away from the machine during operation.

Assembly

Operation

Ignition and Starting Procedures

Procedures for using the ignition module and starting the engine safely.

Driving the Mower

Instructions for driving the mower forward, reverse, and turning maneuvers.

Service and Maintenance

Maintenance Schedule

A schedule outlining regular maintenance tasks and intervals for the mower.

Troubleshooting

Engine Starting Issues

Common problems and remedies for engine starting failures.

Related product manuals