5
NOTE!
The machine is equipped with a safety switch which
immediately breaks the current to the engine if the driver
leaves the seat with engine running and with the connection/
disconnection lever in position "connection".Your
machine is also equiped with a system that will not allow
mower to operate if the bagger or optional rear discharge
deflector is not installed properly.
Driving
Lower the cutting unit by moving the lever forwards. Release
the brake/clutch pedal slowly. Connect the cutting unit and
move the motion control lever to the requireposition. Choose
a ddving speed which suits the terrain and required cutting
results.
\ , _ _i; ¸ _
52
To Next Page
