7. Troubleshooting.
(_" Engine will not start
1. No fuel in fuel tank.
2. Plug defective.
3. Plug connection defective.
4. Dirt in carburettor or fuel pipe,
Start motor will not turn engine
1, Battery flat,
2, Poor contact between cable and battery pole,
3. Connection/disconnection level in wrong position.
4. Main fuse defective.
5. Ignition lock defective.
6, Safety contact for c_utch/brake pedal defective.
7. Clutch/brake pedal not pushed down.
Engine runs unevenly
1, Gear too high.
2. Plug defective.
3, Carburettor incorrectly set.
4, Air _ter blocked.
5. Fuel tank ventilation b_ocked.
6, Ignition setting defective.
7. Dirt in fuel pipe.
Engine feels weak
1. Air filter blocked.
2. Plug defective.
3. Dirt in carburettor or fuel pipe.
4. Carburettor incorrectly set.
Engine overheats
1. Engine ovedoaded.
2. Air inlet or cooling fins blocked.
3. Fan damaged.
4. Too little or no oil in engine.
5. Ignition setting defective.
6. Plug defective.
Battery does not charge
1. Fuse defective.
2. One or several cells defective.
3. Poor contact between batten/poles and cables.
Lighting does not function
1. Bulbs defective.
2. Switch defective.
3. Short-circuit in cable.
The machine vibrates
1. Blades loose.
2. Engine loose.
3. Unbalance in one or both blades resulting from damage
or poor balancing atler sharpening.
Uneven cutting results
1. Blades blunt.
2. Cutting unit skew.
3. Long or wet grass.
4. Grass stuck under cover.
5. Different air pressures in lyres on left and right side.
6. Gear too high.
7. Drive belt slipping.
79
To Next Page
Loading...
