To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 28903 and is the answer not in the manual?
General| Power Source | Gas |
|---|---|
| Engine Type | 4-Cycle |
| Engine Displacement | 140cc |
| Cutting Height Positions | 6 |
| Speed Settings | Variable |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Warranty | 2 years |
| Drive System | Rear wheel drive |
| Cutting Width | 21 inches |
| Cutting Height | 1.25 - 3.75 in. |
Read, understand, and follow all instructions on the machine and in the manual before starting.
Slopes are a major factor related to loss of control and tip-over accidents.
Tragic accidents can occur if the operator is not alert to the presence of children.
Specific guidelines for safely handling and storing gasoline.
Information about purchasing a repair protection agreement for your product.
Lists the tools needed for assembling the tractor.
Steps to assemble and install the steering wheel.
Instructions for mounting the tractor seat.
A final checklist before operating the tractor.
Familiarize yourself with the tractor's controls and adjustments.
Safety precautions for operating on slopes.
Step-by-step instructions for engaging the ROS.
Procedures for starting the engine, including warm/cold weather.
General advice for maintaining the tractor and warranty.
Engine maintenance, lubrication, and oil changes.
How to service and replace the air filter and pre-cleaner.
Guidelines on when to replace the spark plug(s).
Steps to adjust the mower deck for optimal cutting.
How to check and service the tractor's brake system.
Preparing the fuel system for storage to prevent gum deposits.
Draining and refilling the engine oil for storage.
Causes and corrections for engine starting problems.
Identifying and fixing causes of engine power loss.
Troubleshooting issues related to mower cutting quality.
