Craftsman 29918 - 17 in. Dual Rear Tine Tiller-CA Model User Manual

Owner's Manual
BN°
TI
UAL
900 Series
17
ETLL
OTATI
Inch Tine Width
TI
iT
ES
Model No.
917.299180
s
• EspaSol, p. 23
This product has a low emission engine which operates
differently from previously built engines. Before you start the
engine, read and understand this Owner's Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions before
operating this equipment.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Visit our Craftsman website:www.sears.com/craftsman
U.S.A.
425286 Rev. 1

Craftsman 29918 - 17 in. Dual Rear Tine Tiller-CA Model Specifications

General

Engine Type	4-cycle
Engine Brand	Briggs & Stratton
Engine Displacement	208cc
Tilling Width	17 inches
Tine Location	Rear
Forward Speeds	2
Reverse Speeds	1
Warranty	2 year limited

Summary

Warranty

Limited Two Year Warranty

Details of the manufacturer's warranty.

Safety Rules

Training

Operator familiarization and safe practices.

Preparation

Pre-operation checks and safety measures.

Product Specifications

Assembly / Pre-Operation

Install Handle

Operation

How to Use Your Tiller

Stopping Tines

Safely stopping tine movement.

Stopping Engine

Tilling

Before Starting Engine

Fill Engine with Oil

Add Gasoline

To Start Engine

Step-by-step engine start procedure.

Tilling Hints

Cultivating

Maintenance

Maintenance Schedule

Recommended service intervals.

Before Each Use

Daily checks and lubrication.

Lubrication Chart

Engine

Lubrication

To Change Engine Oil

Step-by-step guide for oil change.

Air Cleaner

Spark Plug

Tiller

To Adjust Handle Height

To Replace Ground Drive Belt

Ground Drive Belt Adjustment

Tine Replacement

To Adjust Carburetor

Storage

Tiller Storage

Engine Storage

Troubleshooting Chart

Starting Issues

Diagnosing engine start problems.

Performance Issues

Diagnosing power loss or overheating.

Troubleshooting Chart

Handling and Movement Issues

Diagnosing bounce, soil, or movement problems.

Engine Performance Issues

Diagnosing stalling or laboring.