To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.171020 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Blade Size | 7-1/4 inches |
| Power Source | Corded Electric |
| Blade Diameter | 7-1/4 inches |
| No-Load Speed | 5000 RPM |
| Dust Port | Yes |
| Motor | 15 Amp |
| Arbor Size | 5/8 inch |
| Bevel Capacity | 0-45 degrees |
Covers knowing the tool, work area, guards, environment, children, storage, and proper tool use.
Emphasizes wearing proper apparel, safety glasses, and hearing protection.
Focuses on securing work, maintaining balance, and tool maintenance.
Covers disconnecting tools, removing keys, avoiding accidental starts, and cord care.
Stresses staying alert, checking damaged parts, switch function, and avoiding substances.
Warning about cutting into electrical wiring and avoiding contact with live parts.
Congratulates the user and highlights the saw's dependability, ease of operation, and safety.
Details technical specifications like cutting capacity, horsepower, voltage, and speed.
Outlines the one-year warranty for satisfaction and repair for normal use.
Specifies the 90-day warranty for commercial or rental purposes.
Familiarize yourself with operating features and safety requirements before use.
Connect to 120V, 60Hz AC power only; avoid DC or voltage drops.
Instructions for turning the saw ON/OFF and using the lock-on feature for continuous operation.
How to adjust speed/power using the control selector and its limitations.
Importance of choosing the right blade for material and application for optimal performance.
Step-by-step guide to safely install saw blades using the allen wrench and blade clamp.
How to adjust the base assembly for different cutting positions and blade types.
Instructions for installing flush cutting blades for cuts close to walls or floors.
Techniques for general cutting, securing work, and performing safe plunge cuts.
Techniques for flush cutting near walls and cutting various metals, including safety advice.
Information on the cord design and the tool's sealed lubrication system.
Guidelines on using identical replacement parts and cleaning plastic components safely.
Lists available blades and their specifications for different cutting tasks.
Guidance on selecting and using extension cords to maintain power and prevent overheating.
Lists parts with key numbers, part numbers, descriptions, and quantities for the saw.
Note regarding the double insulated system and servicing by authorized centers.
Contact information and procedures for obtaining repair service for the reciprocating saw.
Information required when ordering parts, including part number and model number.
