To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.171071 and is the answer not in the manual?
Emphasizes reading and understanding all safety rules and operating instructions before initial use.
Explains the safety feature of double insulation, eliminating the need for grounding.
Groups basic safety advice like workspace, attire, tool knowledge, and avoiding hazards.
Advises on servicing double insulated tools by qualified technicians using original parts.
Covers general operation safety, cord care, securing work, and avoiding overreach.
Details on choosing and using appropriate extension cords for power and outdoor use.
Focuses on immediate cutting environment, tool condition checks, and stopping procedures.
Covers operating under influence, plug types, and using identical replacement parts.
Warns about hazardous dust from construction and the need for eye/face protection.
Details blade stroke, horsepower, input, rating, no load speed, and shank capacity.
Instructions on checking the saw for breakage or damage that may have occurred during shipping.
Details what accessories and manuals are included with specific model numbers.
Caution against operating the saw until missing parts are replaced to prevent injury.
Lists available accessory blades with their types, lengths, and teeth per inch for various cuts.
Guidance on choosing the correct blade for optimal performance, cut speed, and blade life.
Encourages learning features and explains basic switch operation for turning the saw ON and OFF.
Specifies voltage, frequency, and AC/DC usage requirements for the saw's motor.
Describes the convenient storage location for the Allen wrench on the saw's handle.
Explains how to engage and disengage the lock-on feature for continuous operation.
Details how to adjust the variable speed control selector for speed and power limits.
Provides operational tips, warnings for low speed usage, and safety reminders.
Step-by-step guide to insert and securely tighten saw blades using the blade clamp.
Instructions for adjusting the base assembly for regular or flush cutting blade positions.
Specific steps for fitting flush cutting blades to the saw bar assembly.
Describes how to perform a standard cut, including setup, starting, and applying pressure.
How to perform plunge cuts by starting inside the area and tilting the blade.
How to use the flush cutting feature for precise cuts close to walls or floors.
Advice and precautions for cutting metal materials, including using cutting oil.
Describes the power cord's features like extra length, flexibility, and a molded cord clip.
Advises on using OEM parts, cleaning plastic parts, and avoiding damaging chemicals.
Warns about specific materials like fiberglass and plaster causing accelerated tool wear.
Details lubrication requirements and best practices for using extension cords.
Provides phone numbers for scheduling in-home repair service for major brands.
Lists phone numbers for ordering replacement parts and inquiring about maintenance agreements.
General