To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.17500 and is the answer not in the manual?
General| Model Number | 315.17500 |
|---|---|
| Category | Power Tool |
| Type | Drill Press |
| Motor Power | 1/2 HP |
| Table Tilt | 45 degrees |
Concept in safety for electric power tools, eliminating need for grounded power cord.
Overview of the router's versatility and advanced electronic features for precise work.
Essential safety rules and precautions to prevent accidents and ensure safe operation.
Details on the chip shield and how to use the router's trigger switch and lock-on feature.
Adjusting speed settings based on material hardness and cutter diameter for optimal performance.
Instructions for changing router cutters and setting the precise cutting depth.
Guidance on routing, speed, feed rates, and avoiding force-feeding or slow-feeding.
Understanding feed direction, thrust, and techniques for edging with pilot bits.
Using guide bushings for routing and proper selection of extension cords for power.
Tips for estimating average cutting diameter and using carbide-tipped cutters effectively.
Instructions for keeping router cutters clean, sharp, and maintaining the collet.
Step-by-step guides for replacing the router's main switch and work light bulb.
General warnings on tool care, avoiding solvents, and handling fiberglass materials.
A guide to common router issues, like starting failures or overload, and their solutions.
Key tips for safe operation, including workpiece clamping, setup checks, and planning.
Detailed list of router parts with key numbers, part numbers, descriptions, and quantities.
Information on ordering replacement parts, including required details like part and model numbers.
