To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.175342 and is the answer not in the manual?
Precautions for safe use of electrical components and cords.
Guidelines for user awareness, attire, and common sense during operation.
Procedures for safely installing and removing router bits.
Factors and methods for choosing the correct depth of cut.
How to set the depth of cut when using the plunge base.
How to set the depth of cut when using the fixed base.
Proper techniques for feeding the router and managing thrust.
Guidelines for determining the correct speed for feeding the router.
Understanding how depth of cut affects quality and tool performance.
Precautions for safe use of electrical components and cords.
Guidelines for user awareness, attire, and common sense during operation.
Procedures for safely installing and removing router bits.
Factors and methods for choosing the correct depth of cut.
How to set the depth of cut when using the plunge base.
How to set the depth of cut when using the fixed base.
Proper techniques for feeding the router and managing thrust.
Guidelines for determining the correct speed for feeding the router.
Understanding how depth of cut affects quality and tool performance.
General| Model Number | 315.175342 |
|---|---|
| Type | Drill Press |
| Voltage | 120V |
| Motor | 1/2 HP |
| Speed | 5 Speeds (620-3100 RPM) |
| Chuck Size | 1/2 inch |
| Table Size | 7-5/8 x 7-5/8 inches |
| Table Tilt | 45 degrees left and right |
