To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 316.29270.1 and is the answer not in the manual?
Details the limited warranty for the cultivator/edger, including coverage and exclusions.
Provides contact information for locating a service center or scheduling service.
Key instructions to follow before operating the unit for safe use.
Explains various safety alert symbols and their meanings.
Covers safe practices during operation, fueling, and handling.
Addresses risks like thrown objects, hot surfaces, and rotating tines.
Details precautions for handling gasoline and operating gas units.
Identifies and describes the main parts and controls of the cultivator/edger.
Guides on how to position and adjust the handlebars for operation.
Explains how to adjust the wheel support bracket for tine depth.
Details the process of converting the cultivator to an edger.
Specifies the correct type and weight of oil for the engine.
Provides step-by-step instructions for adding oil to the engine crankcase.
Advises on using fresh, clean, unleaded gasoline and avoiding alcohol blends.
Explains the correct procedure for fueling the unit safely.
Step-by-step guide on how to start the cultivator engine.
Instructions on how to properly stop the cultivator engine.
General advice for operating the cultivator safely and effectively.
Guidelines for safely moving the cultivator from one location to another.
Outlines required maintenance procedures at specified intervals.
Instructions for removing, replacing, and maintaining the cultivator tines.
Procedures for checking and changing the engine oil.
Steps for cleaning and maintaining the air filter for optimal performance.
Guides on carburetor and idle speed adjustments.
Instructions for checking and adjusting valve rocker arm clearance.
Procedures for replacing the spark plug and maintaining the spark arrestor.
Guidance on how to clean the exterior of the unit safely.
Advice on proper storage of the unit, including short and long term.
Lists common causes and actions for an engine that won't start.
Troubleshooting steps for an engine that fails to idle properly.
Diagnoses and actions for engine acceleration and power loss.
Identifies causes and solutions for oil leaks around the fill plug.
Addresses issues where the unit hesitates during operation.
Technical details of the engine, including type, displacement, and RPM.
Physical specifications of the cultivator, such as path width and weight.
Lists and illustrates the various engine components with part numbers.
Lists and illustrates the cultivator-specific parts with part numbers.
Explains the emission control system warranty rights and obligations.
General