To Next PageTo Next PageWhat to do if my Craftsman 316.2926 Tiller motor will not start?
If your Craftsman Tiller's motor won't start, ensure the extension cord is securely plugged into the cultivator's cord outlet receptacle and a 110V outlet. Also, make sure you are pressing the starter button while squeezing the bail against the handle. Finally, check the overload protection switch and depress it if it has popped out, then follow the starting instructions.
How to start a Craftsman Tiller?
To start your Craftsman Tiller, ensure the extension cord is securely plugged into the cultivator's cord outlet and a 110V outlet. Also, press and hold the starter button while squeezing the bail against the handle. If it still doesn't start, depress the overload protection switch before trying again.
Why my Craftsman 316.2926 won't start?
Your Craftsman Tiller might fail to start if it's unplugged. Make sure the extension cord is securely connected to both the tiller and a 110V outlet. Also, ensure you are properly using the starter button and bail by pressing the starter button while squeezing the bail against the handle. Another potential cause is a popped overload protection switch; depress it and try starting again.
General| Manufacturer | Craftsman |
|---|---|
| Model Number | 316.2926 |
| Fuel Type | Gasoline |
| Engine Displacement | 208cc |
| Tine Count | 4 |
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
| Engine Type | 4-cycle OHV |
Basic safety precautions for electric gardening appliances.
Explanation of safety symbols and pictographs used in the manual.
Identification of cultivator parts and their functions.
Steps to safely unpack the cultivator from its packaging.
Instructions for connecting and securing the cultivator handles.
Guide on how to properly route and secure the extension cord.
How to connect the cultivator to a power source safely.
Procedure for safely shutting down the cultivator.
Explanation of the overload protection feature and reset procedure.
Steps for adjusting the wheel support for desired cultivating depth.
How to operate the cultivator for effective tilling.
Steps for removing, cleaning, and replacing cultivator tines.
Guidance on correct orientation and installation of tine assemblies.
Common causes and actions for a cultivator that won't start.
Technical details and performance specifications of the cultivator.
Detailed list of all parts with corresponding item numbers and descriptions.
Information on professional installation services offered by Sears.
