To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 320.27669 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 320.27669 |
| Category | Power Tool |
| Language | English |
Explains the meaning and usage of various safety symbols in the manual.
Provides general and specific safety guidelines for operating power tools.
Lists and illustrates all items included in the router's packaging.
Introduces the router's components and features with a diagram.
Details the technical specifications of the router, including ratings and capabilities.
Guide on choosing and using appropriate cutter bits for the router.
Step-by-step instructions for safely installing and removing cutter bits.
Instructions for cleaning and maintaining the collet and nut for proper grip.
Guidelines for keeping cutter bits clean, sharp, and for sharpening them.
Instructions for attaching the motor housing to the plunge base.
Instructions for detaching the motor housing from the plunge base.
Explains how to set and adjust the cutting depth for precise results.
Details how to use the plunge feature for lowering the bit into the workpiece.
Instructions for setting and using the depth stop for consistent cuts.
Explains fine-tuning depth adjustments using the micro-adjustment knob.
Describes the location and operation of the power switch.
Explains the benefit of the soft start motor for longevity and performance.
Information about the built-in worklights for improved visibility.
Explains the function of the indicator light for power source connection.
Describes the use and attachment of the edge guide for various routing tasks.
Instructions on setting up the router's digital screen and parameters.
Details how to use the electronic controls to set the router speed.
Explains how electronic feedback maintains consistent speed under load.
Guidance on positioning the router and starting the cutting process.
Specific instructions for performing edge routing operations.
Instructions for performing internal cuts using the plunge base.
How to use pilot bits for edge shaping and guidance.
General principles for feeding the router during operation.
Explains the correct direction of feed for external cuts to avoid kickback.
Explains the correct direction of feed for internal cuts with guides.
Factors influencing the feed rate and how to adjust it for different materials.
Consequences of feeding the router too fast and how to detect it.
Consequences of feeding the router too slowly and how to detect it.
Information on the chip shield's function and removal.
How to attach and use the vacuum port for dust collection.
Instructions for adjusting depth using a specific wrench, likely for table use.
Guidelines on parts replacement and servicing by qualified technicians.
Regular cleaning and inspection procedures for the tool.
Step-by-step guide for replacing worn carbon brushes.
Information regarding the tool's lubrication requirements (or lack thereof).
A table addressing common issues and their solutions.
Information and recommendations for using accessories with the router.
