SAVE THESE INSTRUCTIONS
Some of the following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
n o No Load Speed Rotational speed, at no load
] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed,
orbits, etc., per minute
Do not expose to rain or use in damp
Wet Conditions Alert locations.
To reduce the risk of injury, user must
Read The Operator's Manual read and understand operator's manual
before using this product.
O Always wear safety goggles or safety
Eye Protection glasses with side shields and a full face
shield when operating this product.
_lb Alert Precautions that involve
Safety your safety.
No Hands Symbol Failure to keep your hands away from theblade wil! result in serious personal injury.
No Hands Failure to keep your hands away from the
Symbol
blade wil! result in serious personal injury.
No Hands Failure to keep your hands away from the
Symbol
blade wil! result in serious personal injury.
No Hands Symbol Failure to keep your hands away from the
blade wil! result in serious personal injury.
2767 ManuaLRevised_10 1213 Page 4
To Next Page
