To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 351.181740 and is the answer not in the manual?
General| Type | Brad Nailer |
|---|---|
| Power Source | Pneumatic |
| Fastener Type | Brad Nails |
| Operating Pressure | 70-120 psi |
| Magazine Capacity | 100 nails |
| Nail Gauge | 18-gauge |
Details the warranty coverage for product defects and workmanship within one year from purchase.
Provides an overview of the tool's features, design, and intended applications.
Lists technical details including capacity, fastener sizes, operating pressure, and dimensions.
Explains air pressure requirements, compressor output, and hose connection guidelines.
Step-by-step instructions for placing brad nails into the tool's magazine.
Step-by-step instructions for placing staples into the tool's magazine.
Describes how to operate the tool for driving one fastener per trigger activation.
Explains the method for driving fasteners continuously with rapid trigger action.
Guides on adjusting the contact trip mechanism to control fastener depth.
Details the function of the pad to prevent marring of finished surfaces.
States that this is an oilless tool and does not require lubrication.
Provides guidance on cleaning the magazine and the piston-ram assembly.
Outlines daily procedures to verify the proper functioning of the safety mechanism.
Informs about the availability of rebuild kits for tool repair.
Lists compatible fasteners and their corresponding part numbers for purchase.
Lists specific rebuild kits available for tool components and their illustration references.
