To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 351.181790 and is the answer not in the manual?
Details the Craftsman Clipped Head Angle Framing Nailer's features and applications.
Provides technical details including capacity, nail sizes, and operating pressure.
Explains requirements for compressed air source and connections for safe operation.
Instructions for loading nails into the tool's magazine before use.
Guides on how to operate the tool for driving fasteners safely and effectively.
Details how to adjust the contact trip for precise fastener depth control.
Steps to safely clear jammed fasteners from the tool's magazine.
Guide on positioning the exhaust deflector for directional air flow.
Determining and setting the correct air pressure for optimal tool operation.
Guidelines for operating the tool in cold weather environments.
Instructions for daily lubrication of the tool using air tool oil.
Guidance on cleaning the magazine and ensuring the piston-ram tip is maintained.
Procedure for daily inspection of the tool's safety mechanism.
Information on available rebuild kits for tool repair.
List of recommended accessories and their corresponding model numbers for purchase.
Details the Craftsman Clipped Head Angle Framing Nailer's features and applications.
Provides technical details including capacity, nail sizes, and operating pressure.
Explains requirements for compressed air source and connections for safe operation.
Instructions for loading nails into the tool's magazine before use.
Guides on how to operate the tool for driving fasteners safely and effectively.
Details how to adjust the contact trip for precise fastener depth control.
Steps to safely clear jammed fasteners from the tool's magazine.
Guide on positioning the exhaust deflector for directional air flow.
Determining and setting the correct air pressure for optimal tool operation.
Guidelines for operating the tool in cold weather environments.
Instructions for daily lubrication of the tool using air tool oil.
Guidance on cleaning the magazine and ensuring the piston-ram tip is maintained.
Procedure for daily inspection of the tool's safety mechanism.
Information on available rebuild kits for tool repair.
List of recommended accessories and their corresponding model numbers for purchase.
General