To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 351.518580 and is the answer not in the manual?
Details the terms and conditions of the manufacturer's one-year limited warranty for product defects.
Outlines the construction, capabilities, and features of the Multi-Jaw Bench Vise.
Instructions on how to properly mount and secure the bench vise to a work surface.
Guide on how to adjust and lock the angle of the vise jaws for specific tasks.
Steps for opening jaws and securely clamping a workpiece using the leadscrew handle.
Advice on keeping the vise's moving parts clean from debris for smooth operation.
Instructions for lubricating the vise's machined surfaces and leadscrew with oil.
Details the terms and conditions of the manufacturer's one-year limited warranty for product defects.
Outlines the construction, capabilities, and features of the Multi-Jaw Bench Vise.
Instructions on how to properly mount and secure the bench vise to a work surface.
Guide on how to adjust and lock the angle of the vise jaws for specific tasks.
Steps for opening jaws and securely clamping a workpiece using the leadscrew handle.
Advice on keeping the vise's moving parts clean from debris for smooth operation.
Instructions for lubricating the vise's machined surfaces and leadscrew with oil.
General| Type | Angle Grinder |
|---|---|
| Model Number | 351.518580 |
| Voltage | 120V |
| No Load Speed | 11, 000 RPM |
| Wheel Diameter | 4-1/2 inches |
| Amperage | 7.5 Amps |
| Spindle Thread | 5/8-11 in |
| Arbor Size | 7/8" |
