To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.354870 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 42cc |
| Bar Length | 18 inches |
| Weight | 10.8 lbs |
| Oil Capacity | 6.8 oz |
| Type | Gas-powered |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inches |
Understand the saw's components, safety features, and legal requirements.
Steps for assembly, attaching components, and preparing the saw for operation.
Instructions for operating control devices and starting the engine safely.
Understanding kickback causes, reduction methods, and maintaining control.
Guide to using the built-in system for sharpening the saw chain.
Process for sharpening side plates manually after using the Power Sharp system.
Instructions for replacing or removing the sharpening stone assembly.
Fundamental steps and safety points for cutting wood.
Procedures for planning and executing tree felling safely.
Techniques for cutting fallen trees into desired log sizes.
Safe methods for removing branches from felled trees.
Procedures for maintaining the guide bar and chain for optimal performance.
Cleaning and maintaining engine systems for proper operation.
Steps for repairing or replacing the starter rope assembly.
Maintenance and inspection of the clutch, drum, and sprocket components.
Adjusting carburetor settings for optimal engine performance.
Cleaning and maintaining the air filter for engine efficiency.
Checking and replacing vibration isolator mounts.
Procedures for safely storing the chain saw for extended periods.
Listing of available accessories for saw maintenance.
