Craftsman 358.795750 - User Manual

Instruction Manual
23cc/1.4 cu. in. 2-Cycle
GASOLINE HEDGE TRIMMER
Model No.
358.795750 - 18" Blade
• Safety
• Assembly
• Operation
• Maintenance
• Parts List
• Espa_ol
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
For answers to your questions about this product:
Call 7 am-7 pm, Mon-Sat; 10 am-7 pm, Sun
1-800-235-5878 /.oars listed are Central Time)
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
530163858 2/24/03

Summary

Safety Rules

Know Your Unit

Handle Fuel With Caution

Eliminate all sources of sparks or flame in areas where fuel is mixed, poured, or stored.

Operate Your Unit Safely

Follow safety rules for operation, including blade safety and environmental precautions.

Maintain Your Unit Properly

Operation

Know Your Hedge Trimmer

Before Starting Engine

Fueling Engine

Instructions on how to properly mix fuel and oil for the hedge trimmer.

Stopping Your Engine

Procedure to stop the engine by moving the ON/OFF switch to the OFF position.

Starting a Cold Engine

Step-by-step guide for starting a cold or warm engine after running out of fuel.

Starting a Warm Engine

Procedure for starting the engine when it is already warm.

Starting a Flooded Engine

Instructions for starting an engine that may be flooded with fuel.

Maintenance

Care & Maintenance Task

Check for Loose Fasteners and Parts

Check for Damaged or Worn Parts

Clean Air Filter

Service and Adjustments

Carburetor Adjustment

Procedure for adjusting the carburetor for optimal engine performance.

Troubleshooting Table

Craftsman 358.795750 Specifications

General

Engine Type	2-cycle
Displacement	25cc
Cutting Width	17 inches
Fuel Mix Ratio	40:1
Engine Displacement	25cc
Cutting Swath	17 inches
Shaft Type	Straight
Type	Gasoline