To Next PageTo Next Page
Need help?Do you have a question about the Craftsman BRUSHWACKER 358.795050 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 25cc |
| Cutting Swath | 17 inches |
| Shaft Type | Straight |
| Handle Type | Loop |
Guidelines for safe operation, including personal protective equipment and alertness.
Safety precautions for unit condition, parts, and maintenance procedures.
Instructions for installing the handlebar and securing it.
Steps to properly adjust and attach the shoulder strap for balance.
Guidance on selecting and assembling cutting heads for different tasks.
Information regarding the assembly of the trimmer head attachment.
Install the plastic shield and attach the trimmer head to the gearbox.
Procedure for installing the metal shield for blade use.
Steps to securely install the metal blade onto the gearbox.
Location and function of the engine's on/stop switch.
How to use the primer bulb for starting the engine.
Instructions for correctly mixing fuel and oil for the engine.
Detailed steps for starting the engine, including cold and warm conditions.
Procedure for starting a warm or recently used engine.
Troubleshooting steps for a flooded engine.
Correct posture and grip for safe and effective operation.
Guidance on using the trimmer head for cutting grass and weeds.
Method for feeding new trimmer line during operation.
Techniques for cutting grass, weeds, and brush effectively.
Safe operation guidelines when using the blade attachment.
Procedure to inspect fasteners and parts for tightness and wear.
Identifying and reporting damaged or worn components.
Instructions for cleaning the exterior of the unit and its labels.
Procedure for cleaning the air filter.
Maintain spark arrestor and replace spark plug.
Steps for replacing the trimmer line and spool assembly.
Adjusting the idle speed screw for proper engine idling.
Adjusting the low-speed carburetor screw for performance.
Adjusting the high-speed carburetor screw for optimal power.
Verifying smooth engine acceleration after adjustments.
Information about ignition timing.
Preparing the unit, external surfaces, fuel system, and engine for storage.
Other recommendations for proper unit and fuel storage.
