Craftsman 358.795790 User Manual

Instruction Manual
I CRRFTSMRN°I
25cc/1.5 cu. in. 2-Cycle
GASOLINE HEDGE TRIMMER
Model No.
358.795790 - 19" Blade
Safety
• Assembly
Operation
Maintenance
Parts List
Espa_ol
&
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
For answers to your questions about this product:
Call 7 am-7 pm, Mon-Sat; 10 am-7 pm, Sun
1-800-235-5878 _Hours listed are Central Time)
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
530165846 1/17/05

Craftsman 358.795790 Specifications

General

Type	Gas Trimmer
Engine Displacement	25 cc
Engine Type	2-Cycle
Cutting Swath	17 inches
Shaft Type	Straight
Weight	10.5 lbs

Summary

Safety Rules

Handle Fuel With Caution

Follow safety guidelines for mixing, pouring, and storing fuel to prevent fire hazards.

Operate Your Unit Safely

Follow safe operating practices, including keeping body parts away from the blade and using protective gear.

Maintain Your Unit Properly

Follow recommended procedures for maintenance, service, and part replacement to ensure proper function.

Operation

Fueling Engine

Learn the correct procedures and safety precautions for fueling the hedge trimmer.

Starting a Cold Engine

Step-by-step guide to starting the engine from a cold state, including choke and primer use.

Operating Instructions

Follow guidelines for optimal performance and safety during hedge trimming operations.

Stopping Your Engine

Starting a Warm Engine

Guide to starting the engine when it's already warm or has run out of fuel.

Starting a Flooded Engine

Procedure for starting an engine that has been flooded with fuel.

Maintenance

Clean Air Filter

Replace Spark Plug

Service and Adjustments

Carburetor Adjustment

Learn how to adjust the carburetor for optimal engine idle and performance.

Idle Speed Adjustment

Procedure to adjust the idle speed screw to prevent blade movement at idle.

Troubleshooting Table