To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 536.252570 and is the answer not in the manual?
General| Manufacturer | Craftsman |
|---|---|
| Model Number | 536.252570 |
| Cutting Width | 21 inches |
| Cutting Height Range | 1.25-3.75 inches |
| Deck Material | Steel |
| Wheel Size (Rear) | 8 inches |
| Weight | 65 lbs |
| Mulching Capability | Yes |
| Side Discharge | Yes |
| Engine | Briggs & Stratton |
| Engine Type | 4-Cycle |
| Cutting Height Positions | 6 |
| Starting System | Recoil |
| Bagging Capability | Yes |
Safe operating practices for general use, including clearing areas and vehicle handling.
Specific safety instructions for operating the tractor on inclines and uneven terrain.
Steps for preparing the tractor, including battery setup and charging procedures.
Familiarization with the tractor's various controls and their functions.
Procedures for safely stopping the tractor, mower blades, engine, and using the parking brake.
Steps for starting the engine, including with a weak battery, and understanding all-wheel steering.
A schedule detailing maintenance tasks based on operating hours and time intervals.
Guidance on selecting engine oil viscosity and procedures for changing engine oil.
Common causes and solutions for engine starting problems like no start or hard starting.
Troubleshooting for engine issues where the engine turns over but won't start, or only clicks.
