To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 536.270321 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 536.270321 |
| Category | Lawn Mower |
| Language | English |
Engine specifications including horsepower, bore, stroke, and displacement.
Safe operation practices for ride-on mowers, covering general usage and precautions.
Guidelines for safely operating the mower on slopes and uneven terrain.
Owner's responsibilities regarding fuel usage, maintenance, and disposal for environmental protection.
Explains various safety warning symbols found on the unit for hazard identification.
Identifies and explains the function of different control and operation symbols on the mower.
Step-by-step instructions for safely removing the mower from its shipping carton.
Lists and illustrates the fasteners and other loose parts included with the mower.
Information and procedures for handling, charging, and installing a maintenance-free battery.
Detailed steps on how to charge the maintenance-free battery.
Instructions for correctly connecting the positive and negative battery cables.
Steps to switch the transmission from push mode to operational mode.
Instructions for preparing the engine, including checking oil and initial operation notes.
Guidance on checking tire pressure for proper mower operation and cut quality.
How to ensure the mower housing is level for optimal cutting performance.
Identifies and explains the function of all major controls on the mower.
Information on compatible pull-behind attachments and their weight limitations.
Explains the electrical safety features, including Operator Presence and Select Reverse systems.
Details the seat sensor system that shuts off the engine when the operator leaves the seat.
Describes the optional system allowing blades to rotate while in reverse.
Procedures to verify the correct operation of all safety interlock switches.
Explains the functions of the ignition key switch positions for starting and stopping the engine.
Step-by-step instructions for safely stopping the mower and its engine.
Procedures for engaging and releasing the parking brake for secure stopping.
Guidance on using the throttle control for engine speed and cold starts.
Instructions for engaging and disengaging the mower blade and attachments.
Steps for adjusting the mower deck height for different grass lengths.
Procedure to disengage the transmission for pushing the unit.
Explanation of how to control speed and direction using the hydrostatic drive lever.
Detailed steps for safely driving the mower forward.
Instructions for changing direction and driving the mower in reverse.
Chart detailing speed control lever positions and their corresponding functions.
Steps for safely preparing and transporting the mower unit.
Instructions for attaching the side discharge chute for grass dispersal.
Essential checks and preparations required before starting the engine.
Procedure for checking the engine oil level and adding oil if necessary.
Specifies the type and quality of gasoline suitable for the mower's engine.
Safety precautions and instructions for adding gasoline to the fuel tank.
Information on carburetor settings and when adjustments may be needed.
Step-by-step guide to safely starting the mower's engine.
Guidelines for operating the mower with the cutting deck engaged.
Safety instructions and procedures for operating the mower on slopes.
General tips for efficient and safe operation of the mower.
Advice for optimal mowing and grass bagging performance.
Recommendations for effective grass mulching using the appropriate attachment.
Owner's responsibilities for maintaining the product to ensure longevity and warranty coverage.
Instructions for checking tire pressure to ensure correct operation and cut quality.
Guidelines for inspecting the mower blade for damage, wear, and proper installation.
Step-by-step instructions for safely removing and installing the mower blade.
Procedures for sharpening and balancing the mower blade for optimal performance.
Procedures for handling, charging, and installing a maintenance-free battery.
Steps to safely disconnect and remove the battery from the unit.
Instructions for cleaning battery terminals and the battery itself.
Detailed instructions and safety precautions for charging the mower battery.
Diagrams showing lubrication points for the mower and steering gear assembly.
Maintenance procedures related to the mower's engine.
Steps for checking and maintaining the correct engine oil level.
Procedure for draining and refilling the engine oil.
Instructions for cleaning the engine's air cooling system, specifically the air screen.
Guidance on inspecting the muffler for secure mounting and wear.
Instructions for cleaning or replacing the air filter and pre-cleaner components.
Procedure for checking the spark plug gap and replacing it as needed.
Steps to ensure the mower deck is level for an even grass cut.
Procedures for adjusting the attachment clutch for proper blade engagement and disengagement.
Step-by-step instructions for safely removing the mower housing.
Detailed steps for correctly installing the mower housing assembly.
Instructions for removing and installing the belts that drive the mower's motion.
Procedures for replacing the drive belt that powers the mower blades.
Steps to adjust the speed control lever for proper neutral stop and speed regulation.
Procedure for checking and adjusting the clutch to prevent belt slippage.
Instructions for correctly installing the front and rear wheels onto the mower.
Steps to replace a blown fuse that prevents the engine from starting.
Instructions for cleaning debris from the mower housing for optimal performance.
Notes on front wheel alignment, indicating it's not adjustable and requires service if changed.
Procedures for preparing the mower for long-term storage.
Pre-storage inspection of belts, fasteners, and moving parts.
Cleaning the mower housing as part of storage preparation.
Refers to lubrication instructions in the Maintenance section for storage.
Maintenance tasks for the engine before storage.
Instructions for emptying the fuel system to prevent issues during storage.
Procedures for removing, cleaning, and storing the battery for storage.
Lists common causes and solutions when the engine fails to start.
Troubleshooting steps for when the engine starter motor does not engage.
Solutions for engines that are hard to start, involving carburetor, spark plug, and fuel filter.
Identifies issues causing rough engine running or power loss, including oil, air filter, and spark plug.
Addresses problems with smooth engine operation specifically at higher speeds.
Troubleshooting for engine shutdown upon blade engagement, often related to wiring or reverse operation.
Explains why the engine might stop on slopes and advises on proper mowing technique.
Solutions for engine stalling or inability to maintain idle speed, involving spark plug, air filter, and carburetor.
Addresses power reduction in a hot engine, pointing to air screen, oil, carburetor, and fuel filter.
Troubleshooting steps for excessive vibration, including blade, bolts, tire pressure, and belts.
Solutions for improper grass discharge, involving cleaning, cut height, blade, and speed settings.
Steps to diagnose and correct uneven cutting height, focusing on tire pressure and housing leveling.
Troubleshooting for mower blades that do not rotate, usually due to drive belt issues.
Solutions for the mower failing to move when the clutch is engaged, typically related to the drive belt.
Addresses issues where the mower moves slowly or stops upon clutch engagement, often requiring clutch adjustment.
Explains potential belt noise after pedal release and how to check belt routing and adjust the clutch.
Troubleshooting for rear wheel spin, related to front axle pivotability.
Confirms this is normal behavior due to the operator presence system.
Explains that the engine stops in reverse if the blade rotation control is not disengaged first.
Troubleshooting steps for stiff gear shifting involving clutch adjustment and belt guide checks.
Outlines the owner's duties for maintaining the engine and presenting it for warranty service.
Details specific warranty coverage terms, parts, length, claims, exclusions, and maintenance requirements.
Owner's responsibilities for maintaining the product to ensure longevity and warranty coverage.
Instructions for checking tire pressure to ensure correct operation and cut quality.
Guidelines for inspecting the mower blade for damage, wear, and proper installation.
Step-by-step instructions for safely removing and installing the mower blade.
Procedures for sharpening and balancing the mower blade for optimal performance.
Procedures for handling, charging, and installing a maintenance-free battery.
Steps to safely disconnect and remove the battery from the unit.
Instructions for cleaning battery terminals and the battery itself.
Detailed instructions and safety precautions for charging the mower battery.
Diagrams showing lubrication points for the mower and steering gear assembly.
Maintenance procedures related to the mower's engine.
Steps for checking and maintaining the correct engine oil level.
Procedure for draining and refilling the engine oil.
Instructions for cleaning the engine's air cooling system, specifically the air screen.
Guidance on inspecting the muffler for secure mounting and wear.
Instructions for cleaning or replacing the air filter and pre-cleaner components.
Procedure for checking the spark plug gap and replacing it as needed.
Steps to ensure the mower deck is level for an even grass cut.
Procedures for adjusting the attachment clutch for proper blade engagement and disengagement.
Step-by-step instructions for safely removing the mower housing.
Detailed steps for correctly installing the mower housing assembly.
Instructions for removing and installing the belts that drive the mower's motion.
Procedures for replacing the drive belt that powers the mower blades.
Steps to adjust the speed control lever for proper neutral stop and speed regulation.
Procedure for checking and adjusting the clutch to prevent belt slippage.
Instructions for correctly installing the front and rear wheels onto the mower.
Steps to replace a blown fuse that prevents the engine from starting.
Instructions for cleaning debris from the mower housing for optimal performance.
Notes on front wheel alignment, indicating it's not adjustable and requires service if changed.
Procedures for preparing the mower for long-term storage.
Pre-storage inspection of belts, fasteners, and moving parts.
Cleaning the mower housing as part of storage preparation.
Refers to lubrication instructions in the Maintenance section for storage.
Maintenance tasks for the engine before storage.
Instructions for emptying the fuel system to prevent issues during storage.
Procedures for removing, cleaning, and storing the battery for storage.
Lists common causes and solutions when the engine fails to start.
Troubleshooting steps for when the engine starter motor does not engage.
Solutions for engines that are hard to start, involving carburetor, spark plug, and fuel filter.
Identifies issues causing rough engine running or power loss, including oil, air filter, and spark plug.
Addresses problems with smooth engine operation specifically at higher speeds.
Troubleshooting for engine shutdown upon blade engagement, often related to wiring or reverse operation.
Explains why the engine might stop on slopes and advises on proper mowing technique.
Solutions for engine stalling or inability to maintain idle speed, involving spark plug, air filter, and carburetor.
Addresses power reduction in a hot engine, pointing to air screen, oil, carburetor, and fuel filter.
Troubleshooting steps for excessive vibration, including blade, bolts, tire pressure, and belts.
Solutions for improper grass discharge, involving cleaning, cut height, blade, and speed settings.
Steps to diagnose and correct uneven cutting height, focusing on tire pressure and housing leveling.
Troubleshooting for mower blades that do not rotate, usually due to drive belt issues.
Solutions for the mower failing to move when the clutch is engaged, typically related to the drive belt.
Addresses issues where the mower moves slowly or stops upon clutch engagement, often requiring clutch adjustment.
Explains potential belt noise after pedal release and how to check belt routing and adjust the clutch.
Troubleshooting for rear wheel spin, related to front axle pivotability.
Confirms this is normal behavior due to the operator presence system.
Explains that the engine stops in reverse if the blade rotation control is not disengaged first.
Troubleshooting steps for stiff gear shifting involving clutch adjustment and belt guide checks.
