Need help?Do you have a question about the Craftsman 536.884791 and is the answer not in the manual?
General| Engine Displacement | 208 cc |
|---|---|
| Clearing Width | 24 inches |
| Stages | Two-stage |
| Drive Type | Self-propelled |
| Engine Type | 4-cycle OHV |
| Throw Distance | Up to 40 feet |
| Starter Type | Electric |
| Chute Control | Remote |
| Auger Material | Steel |
| Start Type | Electric start |
| Intake Height | 21 inches |
Outlines the two-year warranty terms and conditions for the snow thrower.
Emphasizes the importance of reading and following safety instructions.
Alerts users to chemicals in engine exhaust linked to cancer and reproductive harm.
Stresses thorough familiarization with controls and proper operation.
Covers crucial safety steps before starting snow thrower operation.
Details essential safety measures during snow thrower use.
Step-by-step guide for assembling the snow thrower.
Lists necessary tools and identifies parts for assembly.
Instructions for safely unpacking the snow thrower from its packaging.
Guides the attachment of the upper handle and crank mechanism.
Details the process for attaching and aligning the snow chute.
Verifies completion of assembly steps and checks for loose parts.
Labels and describes the function of each control and component.
Provides instructions for safely stopping the auger and the engine.
Explains how to adjust chute direction and deflector for snow throwing.
Details how to engage the auger drive for forward movement.
Guides on engaging the auger to throw snow effectively.
Step-by-step guide for starting the engine using the electric starter.
Instructions for starting the engine manually using the recoil starter.
Advice for maximizing performance and efficiency during snow removal.
Emphasizes regular maintenance for warranty and performance.
Lists key technical details like horsepower, capacity, and oil type.
Explains how to check and maintain the engine oil level.
Details procedures for cleaning and checking the snow thrower after each use.
Advises on the correct type and viscosity of oil for different temperatures.
Instructions for checking, cleaning, and replacing the spark plug.
Guides on adjusting the clutch control cable for proper operation.
Explains how to adjust the auger drive belt tension.
Details the procedure for replacing a broken shear bolt.
Steps for cleaning and preparing the unit for storage.
Guidance on fuel treatment and engine care for long-term storage.
Advice on where and how to store the snow thrower.
Addresses issues related to the engine failing to start or starting erratically.
Covers problems like stalling, rough running, or loss of power.
Solutions for units that fail to propel or exhibit excessive vibration.
Troubleshooting steps for clogged chutes or objects lodged in the auger.
To Next Page