Do you have a question about the Craftsman 536.884811 and is the answer not in the manual?
Manufacturer | Craftsman |
---|---|
Model Number | 536.884811 |
Engine Type | 4-Cycle OHV |
Engine Displacement | 208cc |
Clearing Width | 24 inches |
Intake Height | 21 inches |
Throw Distance | Up to 40 feet |
Starter Type | Electric Start |
Drive System | Self-Propelled |
Auger Material | Steel |
Skid Shoes | Adjustable |
Warranty | 2-Year Limited |
Fuel Tank Capacity | 2.7 quarts |
Chute Control | Manual |
General safety precautions and checks before operating the snow thrower.
Guidelines for safe handling and storage of fuel.
Safety measures during snow thrower operation.
Safety precautions during maintenance and repair.
Lists items included in the snow thrower packaging.
Lists necessary tools for assembling the snow thrower.
Steps for preparing the snow thrower for use after unpacking.
Steps for attaching the upper handle and chute crank assembly.
Introduction to snow thrower controls and their functions.
How to adjust the chute direction and distance.
Instructions for operating the traction drive and speed shifter.
Detailed procedures for starting the engine, including cold and warm starts.
Lubrication points and schedule for the snow thrower.
Procedures for checking and changing engine oil.
How to adjust the skid height for proper ground clearance.
Instructions for adjusting the track drive and auger drive belts.
Steps for replacing the auger drive and track drive belts.
Instructions for replacing the shear bolt for auger protection.
Procedures for adjusting the engine carburetor settings.
Procedures for preparing the engine for long-term storage.
Steps for cleaning and preparing the snow thrower for storage.
A table outlining service tasks and their recommended intervals.
Diagrams and part lists for the snow thrower's handle assembly.
Diagrams and part lists for the snow thrower's engine components.
Diagrams and part lists for the snow thrower's carburetor.